Aviation Maintenance Technician resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Professional Summary
Skills
Work History
Maintenance Technician, 08/2017 to Current
Helen of Troy Southaven, MS
  • Installed pipe systems and plumbing.
  • Inspected drives, motors and belts.
  • Referenced blueprints, repair manuals and parts catalogs for complex repairs.
  • Followed routine and preventative maintenance checklists.
  • Operated tools, including hoists, saws and drills.
  • Repaired and calibrated equipment using precision measuring instruments.
  • Conducted preventive and corrective maintenance on bearings, pumps, shafts and fans.
  • Diagnosed mechanical problems and determined the best ways to correct them.
  • Repaired defective equipment parts.
Meat Clerk/Butcher, 08/2016 to 05/2017
Kroger Marketplace Hernando, MS
  • Managed departments fresh meat goods
  • Kept shelves stocked accordingly filling organizing facing pricing and tagging products
  • Assisted customers providing information on pricing purchases and products
  • Kept meat aisles and storage and work areas in clean orderly and sanitized condition
  • Experienced with selling and cross selling of meat products
  • Greeted customers helping them navigate the store to find products departments and answering questions
Education
High School Diploma: 2016
Magnolia Heights School - Senatobia, MS
This resume is created in 7 minutes.
Professional Summary
Accomplished Operations and Maintenance Professional offering over 15 years of experience derived through industry and service in the United States Air Force. Possesses broad based knowledge and practical application of aerospace propulsion, multiple types of tools, mechanisms, and performance systems. I know my in-dept experience as an organizational leader can be an asset to your organization.
Skills

Lean Manufacturing

Quality Assurance

Fault Tree

DTOS

HAZMAT Management

Training and Development

Safety Standard Compliance

Aerospace Propulsion

Team Building 

Preventative Maintenance 

Work History
Senior Aviation Maintenance Supervisor, 02/2013 to 09/2017
U.S. AIR FORCE McChord Air Force Base, WA
  • Mentored and trained a staff of 25 personnel over the course of five shift operations.
  • Ensured high maintenance standards while establishing preventative and periodic maintenance procedures utilizing Computerized maintenance Digital Technical Order System (DTOS) job guide.
  • Responsible for ensuring compliance with all regulatory and internal procedures regarding the day-to-day operation and maintenance for the high-tech Pratt & Whitney (P&W) F117-PW-100 turbofan engines.
  • Developed monthly activity report / executive summary and briefed senior management on quality trends.
  • Implemented Air Force AFSO 21 Smart Operations (Six Sigma equivalent) that resulted in significant and measurable improvements in the areas of total quality management and continuous process improvement.
  • Implemented corrective action plans as well as investigations for identified, recurring and/or interrelated issues reducing re-occurrences by over 85%.
Aviation Production Supervisor, 09/2005 to 02/2013
United States Air Force Elmendorf Air Force Base, AK
  • Supervised a team of 15 in maintenance of turbofan engines and auxiliary power units on 26 aircraft valued at $5.6B with the utilization of technical orders, schematics, logic diagrams, and built-in test functions to isolate and repair system malfunctions.        
  • Organized Crashed/Damaged/Disabled Aircraft Recovery (CDDAR) program efforts while improving accountability and eliminating waste.
  • Developed tracking plan for F-15 maintenance, reducing unscheduled engine maintenance increasing availability of aviation platforms by 63%. 
  • Led special projects with outcomes that validated product safety updates to meet new requirements, coordination with outside agencies, completing all projects ahead of schedule, and revised training program.
Aviation Maintenance Technician, 12/1997 to 09/2005
United States Air Force Tinker Air Force Base, OK
  • Performed troubleshooting, diagnosis, component replacement, repair, and comprehensive tests to the P&W F-100-100/220 engines and secondary power equipment for F-15 aircraft.
  • Conducted detailed tests to identify and prevent in-flight anomalies.
  • Developed solutions to production problems with 20 aviation agencies throughout the maintenance operations.
Education
Bachelor of Science: Applied Management, December 2017
Grand Canyon University - Phoenix, AZ

This resume is created in 7 minutes.
Professional Summary
Proven aviation support equipment technician with 4 years of experience pertaining to operating, maintaining, and repairing automotive, diesel, electrical, and hydraulic systems. Skilled in problem solving and troubleshooting mechanical and electrical malfunctions.
Skills
  • Maintenance and operation of forklifts, cranes, and hoists
  • Removal and repair of engine, electric, and hydraulic components
  • Proper tool control and use of special tools
  • Quality assurance and safety
  • In depth inspections of equipment 
  • Corrosion treatment and prevention
  • Welding and painting
  • Understanding of schematic diagrams 
  • Use of multimeters 
  • Preventative maintenance
  • Utilize technical publications
  • Great communication skills and costumer service
  • Perform well in stressful situations 
  • Active U. S. secret security clearance 
Work History
Aviation Support Equipment Technician, 03/2014 to 01/2018
United States Navy Jacksonville, FL
  • Lead a team of 12 employees in the overall maintenance and upkeep of 170 pieces of ground support equipment worth over 20 million dollars. 
  • Performed high priority troubleshooting and repairs to aviation equipment and material handling equipment to support flight operations and mission success.
  • Handpicked by senior leadership as a collateral duty inspector to ensure that all maintenance practices are being performed correctly per orders and directives.
  • Instructed classes and training on operation and orientation of 28 different aviation support equipment assets.
  • Practiced proper hazardous material disposal and use of personal protective equipment on a daily basis in accordance with job requirements. 
  • Planned and orchestrated the correct ordering of parts through technical publications and online supply center for 75 percent of all scheduled and unscheduled maintenance. 
Education
Oxyfuel/Shielded Metal Arc Welding Certificate: Fleet Readiness Center Southeast - Jacksonville, FL
Aircraft Paint/Finish Course: Center for Naval Aviation Technical Training - Norfolk, VA
Aircraft Corrosion Control: Fleet Readiness Center Southeast - Jacksonville, FL
This resume is created in 7 minutes.
Professional Summary

Diciplined military veteran with a highly motivated/can-do attitude turned competent Measurement and I&E technician with 5 years of industry experience.

Skills

    Budget Responsibility,         Team Player                         Creative problem solver

    Microsoft Office Expert               Quick Learner                                   Great personal skills

Work History
Measurement Technician, 10/2018 to Current
XTO Energy (Exxon Mobile) Springer, OK
  • Inspect, install, test, operate, repair and calibrate measurement equipment to include Totalflow RMC, ROC 107 & 800, and Flow Bosses.
  • Send weekly reports of detailed work activity
  • Troubleshoot and repair communication issues in a timely and cost effective manor.
  • Pull gas samples and test the H2S levels to ensure safe operation and pipeline longevity.
  •  Configure Red lion display modules, Man compressor station and watch tank levels. Install control sticks, Operate and set up Gas Chromatographs.
  • Test and maintain ultrasonic meters.
I&E / Measurement Technician, 01/2015 to 09/2018
FourPoint Energy Wheeler, Tx
  • Inspect, install, test, operate, repair and calibrate measurement equipment to include over 500 meters.
  • Experience in Totalflow, ROC, Bristol, Thermo Fisher, and Weatherford/Kimray  applications.
  • Send weekly reports of detailed work activity
  • Troubleshoot and repair communication issues in a timely and cost effective manor.
  • Pull gas samples and test the H2S levels to ensure safe operation and pipeline longevity.
  • Identify,report and correct safety and environmental concerns.
Terminal Operator, 03/2014 to 01/2015
Linn Energy Wheeler, TX
  • Facilitate the safe movement, receipt and shipment of product between pipelines, tanker trucks and storage tanks by strictly following policies and procedures.
  • Ensure that product transactions are properly measured, accurately documented, and conducted in accordance with established policies and procedures.
  • Ensure that tanks are properly gauged by physically climbing the tanks and reading a gauge tape and plumb bob accurately down to 1/16th of an inch.
  • Assist in the maintenance and repair of metering devices, pumps, valves, and related equipment.
  • Issue work permits,  oversee contract workers, Monitor Terminal hardware & maintenance purchasing in accordance with company procedures.
Pressure Test Specialist, 01/2014 to 03/2014
Pace Oilfield Company Hobbs, NM
  • Pressure test well heads with over 3,000psi water pump
  • Pull a 32' trailer containing pump and water
  • Tear down and build up sand separator at well site.
  • Rebuild full port valves
  • Maintain trailers, and pickups to DMV specs
Maintenance Operations Controller, 01/2011 to 01/2014
United States Air Force Okinawa, Japan
  • Communicate with flight line maintenance personnel and ensure accurate information flow through all levels of supervision.
  • Supervised and coordinated maintenance actions on the flight line for nine C-130 aircraft.
  • Develop and reconfigure maintenance schedules to match up with flight operations to ensure 100% mission effectiveness.
  • Deployed around the pacific and participated in humanitarian aid to various countries to include the Philippines, Japan and Thailand.
Crew Chief, 06/2007 to 01/2011
United States Air Force Little Rock Okinawa, Japan, AR
  • Examined and inspected aircraft components, including landing gear, hydraulic, and deice systems to Located cracks, breaks, leaks and other problems.
  • Inspect completed work to certify that maintenance meets standards and that aircraft are ready to fly.
  • Maintained, repaired, and rebuilt aircraft structures, functional components, and parts such as wings, fuselage, rigging, hydraulic units, oxygen systems, fuel systems, electrical systems, gaskets and seals.
  • Conducted routine and special inspections as required by regulation.
  • Read and interpreted maintenance manuals, service bulletins and other specifications to determine a feasible and cost efficient method or repair/ replacement.
  • Obtained fuel and oil samples and check them for contamination.
Education
Associate of Applied Science: Aviation Maintenance Technology, 2013
Community College of the Air Force - Okinawa
Aviation Maintenance Technology
Additional Education
Professional Supervisory Education, 2012 Erwin Professional Military Education Center - Okinawa, Japan Airframe and Powerplant License: Aircraft Maintenance, 2014 Dallas School of Aeronautics - Addison, Texas
Additional Information
  • Professional Supervisory Education, 2012 Erwin Professional Military Education Center - Okinawa, Japan Airframe and Powerplant License: Aircraft Maintenance, 2014 Dallas School of Aeronautics - Addison, Texas ACCOMPLISHMENTS Good Conduct Metal recipient Expert Marksman Overseas Long Tour Service Ribbon Airman of the Quarter 2011 National Defence Service Medal Global War on Terrorism Ribbon Outstanding Unit Ribbon Air Force Achievement Ribbon