Industrial Electrician resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.

This resume is created in 7 minutes.
Professional Summary
My objective is to obtain the position of a Process Technician with a World Class Manufacturing Complex.  
Work History
Olefins Process Operator 10/2010 to Current
LyondellBasell – La Porte, TX
  •  Backup (PMC) Production Maintenance Coordinator - Coordinate the Maintenance Operational Workflow Process (MOWP), Knowledge of SAP Software, Scrutinize Notifications in (SAP) Prior to Approval, Sorting, Processing Work Orders in (SAP), Scheduling, Executing & Closure of Work Orders, Forecasting the Monthly Maintenance Budget 10MM annually Olefins Unit, Submitting Monthly Accruals to Accounting (Managing 3rd party services), Managing the Leak Detection and Repair (LDAR) Program
  • Utility Control Board Operator - Operates and monitors the site's steam production and water operations as well as all Tank Farm distribution operations.
  • Compression and Distillation Control Board Operator - Operates the site's two main Refrigeration Compressors and the Primary Pyrolysis Gas Compressor. Controls and monitors process gas separation and product distribution. Works closely with Process Controls in troubleshooting D.C.S. issues in an effort to remove production constraints.
  • E.R.T. Service Member - Serves on the site's Emergency Service Team including Fire, Rescue, and Hazmat.


Olefins Process Operator 07/2008 to 10/2010
ExxonMobil – Baytown, TX
  • Operated and maintained equipment relating to ethylene production. Worked specifically in Fractionation, Compression, and Quench areas.
  • Standing member of the site safety and leadership committee.
  • Fire Team Member
Industrial Electrician 08/2006 to 07/2008
Texan Electric – Houston, TX
  • Installed and maintained electrical equipment such as, substation switch gear, electrical motors, variable frequency drive systems, and P.L.C. panels.
  • Troubleshot and maintained various process transmitters and instrument/pneumatic controllers.
Commercial Electrician 08/2002 to 07/2006
Melton Electric – Houston, TX
  • Installed wiring and electrical equipment in office and commercial buildings.
Heavy Weapons Non-Commissioned Officer 06/1998 to 07/2002
United States Marine Corps – Camp Pendleton, CA

This resume is created in 7 minutes.
Professional Summary
Electrician knowledgeable about PLCs and VFDs  programming and hard wiring. understanding of various types of sensors,photoeyes, pressure switches, float switches and transducers. Electrical and mechanical knowledge about various types of pumps.   Safety-focused Electrician highly effective at testing electrical equipment and predicting possible electrical malfunctions. Electrician bringing a solid understanding of mechanical troubleshooting and electrical installation techniques.
Skills
  • C-10 Electrical Contractor's License
  • Knowledge of National Electric Code (NFPA 70)
  • Troubleshooting complex control systems
  • Exceptionally detail-oriented
  • Expert in schematic design
  • Multilingual (English, Punjabi, Hindi)
Work History
Journeyman Industrial Electrician Oct 2016 - Current
Foster Poultry Farms Fresno, CA
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Consistently updated knowledge of safety requirements and policies.
  • Planned motor starter and control installations using codes and specs.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
Maintenance Supervisor Oct 2016 - Oct 2016
Pitman Farms Sanger, CA
  • Created and updated department work instructions and reports on a regular basis.
  • Oversaw repair and maintenance staff of four employees who cared for equipment, buildings and grounds.
Industrial Electrician Nov 2015 - Oct 2016
Foster Poultry Farms Fresno, CA
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Worked extended hours on weekday and weekend projects.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Developed in-depth knowledge of arc flash ratings and standards.
Maintenance Technician Jul 2012 - Nov 2015
Foster Farms Fresno, CA
  • Repaired and calibrated equipment using precision measuring instruments.
  • Diagnosed mechanical problems and determined the best ways to correct them.
  • Followed routine and preventative maintenance checklists.
  • Referenced blueprints, repair manuals and parts catalogs for complex repairs.
  • Installed data and video equipment.
  • Managed tool shop, monitored stock levels and ordered parts.
Education
Certificate of completion: Electrical System Technology 2017
Fresno City College Fresno, CA
Certificate of Completion: Communication Technology 2016
Fresno City College Fresno, CA
Certificate of Completion: Manufacturer Mechanic 2012
Fresno City College Fresno, CA

This resume is created in 7 minutes.
Professional Summary
Motivated Electrician who completes projects on time and uses professional level skill and trade knowledge to demonstrate superior performance on job sites.
Skills
  • Knowledge of National Electric Code (NFPA 70)
  • Electrical equipment maintenance
  • Blueprint fluency
  • Troubleshooting complex control systems
  • NCCER hands on certified
  • MSHA Certified
  • conduit installation expert
Work History
Electrician , 08/2014 to 08/2014
 Zachry Industrial – Freeport, TX


  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
Industrial Electrician , 07/2014 to 08/2014
 Zachry Industrial – Front Royal, VA
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Industrial & commercial Electrician , 11/2012 to 01/2014
 Zachry industrial – Front Royal, VA
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Planned motor starter and control installations using codes and specs.
  • Consistently updated knowledge of safety requirements and policies.
  • Maintained and tested fire alarm systems.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Worked extended hours on weekday and weekend projects.
  • Recorded the respective measurements for each project.
  • Updated service record files on equipment drawings and history.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Fabricated specific electrical component parts and assemblies.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
Industrial & commercial Electrician , 02/2012 to 11/2012
 Zachry Industrial – Cape Canaveral, FL
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Industrial & commercial Electrician , 01/2011 to 02/2012
 Zachy Industrial – Cape Canaveral, FL
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Industrial Electrician , 02/2009 to 11/2010
 Rees Company – NY
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Planned motor starter and control installations using codes and specs.
  • Consistently updated knowledge of safety requirements and policies.
  • Maintained and tested fire alarm systems.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Worked extended hours on weekday and weekend projects.
  • Recorded the respective measurements for each project.
  • Updated service record files on equipment drawings and history.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Fabricated specific electrical component parts and assemblies.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
Industrial & commercial Electrician , 08/2008 to 02/2009
 Advanced Trade Services Inc – Baltimore, New York
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Worked extended hours on weekday and weekend projects.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
Residential & Commercial Electrician , 04/2008 to 08/2008
 Staff Mark – Bath, Pennsylvania
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Planned motor starter and control installations using codes and specs.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Residential & Commercial Electrician , 01/2008 to 04/2008
 Fagan – Allentown, Pennsylvania
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
Industrial Electrician , 08/2005 to 09/2007
 Seaman's Furniture – Houston, Texas
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
Maintenance Electrician , 05/2003 to 06/2005
 seamans – Robbinsville, New Jersey
  • Maintained and tested fire alarm systems.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
Education
apprentice electrician: electrical, 2004
 Home Builder Institute Grafton Job Corps - North Grafton, MA
  • Computer Skill Improvement course
  • Coursework in Fiber Optics and Structure Cable, Field Estimating Principles and Fire Alarms
  • Conduit Bending Program
facilities maintance : maintenance, 2004
 albany job corps - Albany, NY
  • Advanced Lighting Control coursework
  • Computer Skill Improvement course
  • Conduit Bending Program
High School Diploma: 2004
 perth amboy high school - Perth Amboy, NJ

High school Diploma
Certifications

Nccer hands on certified.

Msha certified.

Osha 30 certified.

Safety council IDs ready.

Texas apprentice license.


Try our tool for Resumes!

Resumist is Resume Free with more than 20 blank resume templates and features that speed up the writing process.

Targeting other Automotive and Motor Vehicles? See one of our examples: