Hydraulic Mechanic resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Summary
Reliable Electronic Technician with comprehensive knowledge of trade practices and techniques. Offers exceptional communication skills and a commitment to high quality service.
Highlights
  • Electrical testing knowledge
  • Troubleshooting expert
  • Strong mechanical aptitude
  • Willing to travel
  • AC and DC motors
  • DC drives
  • Circuitry specialist
  • Electronic test tools
  • Telecommunications field service
Two-way radios
Telecommunications field installations
Accomplishments

While working as an instrument technician at the River Road plant I have made several upgrades. I was the first to employ HART technology to the plant.I researched and chose the toxic and combustible sensors and controllers to replace our obsolete system.

Experience
Surface Electrician
December 2019 to Current
Mosaic-Potash Carlsbad, NM

As part of the surface electrician team,I maintain and repair all things associated with the high voltage feed and distribution, and instrumentation. I work with Cutler Hammer Apmguards, AB VFD's, Densiometers, DP's, sonic and guided radar level transmitters,hoist controls and their dc motors,conveyor belts and strain gauge scales. Typical voltages are 4160,2300, and 480 three phase. We regularly meg motors and their feed lines on a monthly basis and use state of the art laser motor alignment tools when replacing our motors.

Instrumentation Technician
January 2019 to Current
Nava Control Solutiions Carlsbad, NM

I install well automation and scada. I work under the direct supervision of engineers programming AB PLC's, HMI's,NAT"s,Cisco switches,Red Lion DSP's, AB total flows,Cambium subscriber radios, Rosemount pressure and temperature transmitters that are configured though HART.

Communications Technician
October 2017 to January 2019
Key Communications DBA Southwestern Wireless Roswell, NM

I programmed,installed,and tuned a variety of radio equipment. I used for the most part Motorola Mototrbo software to program Mototrbo two way mobiles and base repeaters. I also programmed and repaired Kenwood mobiles,base stations and 800 mhz trunking systems. Using an Aeroflex 1200 Super S monitors,SWR power/swr meters I would troubleshoot and repair radio, antenna, transmission line, and duplexor isuues. I did this for city, state and Federal agencies.

Electronic Technician
June 2017 to September 2017
Elite Well Services Artesia, NM

My responsibilities included maintaining the electronics associated with the fracking equipment. Siemens series 7 PLC's ,HMI's, servers, and Endress and Hauser flow transmitters were backed up on a regular basis. My job was to troubleshoot electronic and software issues as they arose on location during the fracking process and perform preventative maintenance when time allowed for it.

Instrumentation Technician
October 2015 to April 2016
City of Amarillo Amarillo, Texas
I install, maintain, repair, and program various instrumentation pertaining to the water production dept of the city's numerous wells, overhead tanks, and pump stations located throughout the city of Amarillo. This includes  AB PLC's ,Panelviews Freewave and MDS data radios, remotely controlled valve actuators, and various pressure and flow transmitters.
Wastewater Operator
June 2015 to October 2015
City of Roswell Roswell, NM Monitors and maintains plant equipment; adjust blowers to maintain desired dissolved oxygen levels; reads and records a variety of meters and flowcharts. Operates pumps to maintain sludge levels; check temperature; turn and mix sludge as needed; dispose of trash, grease, and dirt on a regular basis; takes samples as needed; keeps log sheets and maintenance charts. Operates a variety of plant related equipment including but not limited to barscreens, grit chambers, and comminutors. Maintains Wastewater Treatment Plant grounds; mows and edges grass area; collects trash; paints; assists with basic repairs.Supports the relationship between the City of Roswell and the general public by demonstrating courteous and cooperative behavior when interacting with visitors and City staff; maintains confidentiality of work-related issues and City information; performs other duties as required or assigned
Plant Mechanic
June 2013 to April 2015
Leprino Foods Roswell, NM Perform mechanical duties such as repair/preventative maintenance to pumps, valves, conveyors, sprockets, gear boxes, welding and fabrication abilities. Calibrate all plant instrumentation in a wide variety of makes and type of specifications. Work with industrial electricity to troubleshoot and repair electrical components and machinery including all three phase, 480, 220 and other plant systems. Complete preventive maintenance work orders. Program/design P.C. programs for existing plant systems and capability of reconstruction and/or updating programs. Comply with Good Manufacturing Practices at all times, including good housekeeping.
Appliance Technician
May 2012 to June 2013
Bush Apliance Roswell, NM I repaired household appliances such as washers , dryers, and dishwashers at customers house and at the shop.
Instrumentation Technician
November 2009 to May 2012
City of Amarillo Amarillo, TX I was the EIT for one of the two WWTP's for the City Of Amarillo. This plant is designed to handle 18 MGD. I was responsible for the purchasing,installation,repair, and calibration of the plant's level and flow meters,motorized valve actuators, and recording devices. These include ultrasonic flow meters, ultrasonic,capacitance, and guided radar level transmitters, and DP transmitters.I'm was also responsible for the maintenance of VFD motor controls,PLC"S, and minor electrical such as lightning etc.I used a Fluke 771 process meter for calibrations and clamp on amp meters and multi meters for diagnosing and repair.
Communications Technician
April 2009 to November 2011
City of Amarillo Amarillo, TX I was responsible for the repair and maintenance of the city's two way radio equipment. Using service monitors,power and SWR meters,and multi-meters I repaired and tuned equipment such as repeaters,base stations,paging systems, and mobile radios for all departments of the city including Police,Fire,Emergency Management ,and various utility departments.
Appliance Technician
November 2008 to January 2009
A&E Services-Sears Roswell, NM
Electric Motor Rebuilder
April 2007 to November 2007
Savage Brothers Electric Roswell, NM I rebuilt and repaired single and three phase electric motors up to 150 HP,power hand tools, and various pumps used for agricultural wells,pools,and gas station pumps.
Communications Technician
March 2004 to April 2006
Key Communications Roswell, NM
  • I repaired and installed two way radio equipment. This included repeater systems,base and mobile radios,RTU's,Data Radios,SCADA,VHF and UHF Trunking, and paging systems. Using equipment such as service monitors,power and SWR meters,oscilloscopes,and multi meters I repaired to component level,programmed, and tuned this type of equipment.
Education
Certificate of Completion : Electronics, 1992 ENMU-Roswell Roswell, NM Emphasis in PC Repair and Telecommunications
This resume is created in 7 minutes.
Professional Summary

Friendly Customer Service skills in communicating with people of diverse cultures while providing exceptional customer service. Natural leader with a passion for team building and promoting positive company morale.

Skills
  • Self-motivated professional
  • Excellent communication skills
  • Customer service-oriented
  • Multi-line phone proficiency
  • Written and oral communication skills
  • Professional phone etiquette
  • Excellent planner and coordinator
  • Multitasking skills
  • Time management
  • CPR/First Aid certified
Work History
Customer Service Specialist, 08/2018 to Current
Best Buy Kenosha, WI
  • Approached each problem with fresh mind and analytical strategies to quickly resolve concerns, while offering each customer top-notch, personal service and polite support to boost sales and customer satisfaction.
  • Supported loss prevention goals by maintaining accurate drawers and monitoring shopper behavior.
  • Actively engaged customers to provide general assistance and information on store merchandise.
  • Greeted customers, helped locate merchandise and suggested suitable options, while employing strategic tactics such as cross-selling and up-selling to drive sales.
  • Balanced and organized cash registers by handling cash, counting change and the stores safe.
Personal Driver/ Shofer, 08/2017 to Current
UberRacine, WI
  • Operated as an independent contractor for Uber, transporting customers more than 55,000 miles without a single accident or serious customer complaint – as well as maintaining an average rating of 4.47 out of 5.00.
Gas Turbine Technical Mechanic, 04/2012 to 03/2014
US NAVY

  Independently managed and operated over $1M in equipment vital to the USS Sterett, which encompasses 300 personnel.  Solely responsible for all Administrative functions to include HAZMAT and training for 15 personnel on board the ship.  In addition, prepared the daily maintenance of the engineering plant along with the weekly maintenance plan which resulted in a combined 85% passing score.                      

Education
Associate of Arts: Liberal Arts And Sciences, 2019
Milwaukee Area Technical College - Milwaukee, WI
High School Diploma: General Stephenville High - Stephenville, TX
Naval Vocational School : Naval Engineering Basic Engineering Common Core Advanced - Great Lakes, IL
Accomplishments
  • Graduated second in my class in Gas Turbine school
  • Received the honor of being awarded on the Dean's List in 2017 at Milwaukee Area Technical School
  • Received the honor of being awarded on the Provost's List in 2018 at Milwaukee Area Technical School
  • Was elected President of Student Government in 2018
This resume is created in 7 minutes.
Career Overview

Dependable Maintenance mechanic with over 13 years of hands-on experience in general facility repairs , electrical, hydraulic, pneumatic's, welding and plumbing.

Skills
  • Proficiency with mechanical and electric tools
  • Industrial control software
  • knowledgeable in all facility repairs
  • Welding/Fork lifts
  • Pneumatics/ Pallet Jacks
  • Trouble shooting and repair industrial equipment such as; mixers, gear boxes, bearings and conveyor belts.
  • Basic mathematic skills
  • Good mechanical aptitude
 
  • Dependable independent worker
  • Project management
  • OSHA regulatory compliance
  • Quality control
  • Timely project completion
  • Strong organizational skills
  • Troubleshooting at component level
  • Hydraulic activity skills
  • Production line/assembly line forklift experience
  • Blueprint reading and interpretation
Accomplishments

Project Planning

  • Provided project controls, cost estimation, and other business support services to technical line management.
  • Supervision of weekend maintenance projects.
  • Trained contract workers to perform general warehouse duties to company standards.

Documentation

  • Reported and documented unsafe conditions, equipment and/or injury.
  • Prepared end of shift maintenance reports by collecting, analyzing and summarizing information and trends.

Equipment Maintenance

  • Performed routine maintenance on equipment on as-needed basis.
  • Detected machine malfunctions and problem-solved accordingly.
  • Repaired, maintained and replaced parts as needed to maintain functioning line.

Certificate's

  •  Recognized for quarterly perfect attendance quarterly.
  •  Recognized monthly for maintaining work place safety.

 

Professional Experience
March 2016 to Current
Mapei Dallas, TX Maintence Technician II
  • Responsible for performing routine building maintenance task.
  • General electrical maintenance; Repair of fixtures, wall switches and outlets.
  • Replacement or repair of leaks and drains or faucets.
  • Replacing ceiling tile
  • Sprinkler line repair
  • Welding, pneumatics and hydraulics
March 2015 to October 2015
Frito Lay Irving, TX Maintenance Mechanic
  • Performed weekly preventive maintenance.​
  • Quick repair of emergency break down on each line.​
  • Testing of  equipment and parts to identify  defects.
  • Disassembled broken and defective equipment to facilitate repair.
  • Replaced worn and damaged hoses, wiring and belts.
  • Replacing AC filters on HVAC roof top systems and cleaning AC refrigeration coils
  • Testing water samples for PH in boilers
  • Maintained up-to-date and accurate repair logs.
September 2006 to February 2015
Custom Building Products Grand Prairie, TX Industrial Maintenance Mechanic
  • ​Weekend shift leader for special projects.
  • Reduced downtime during production by maintaining equipment.
  • Responsible for promoting safe and clean working environment.​
  • Reviewed work orders and communicated with prior shift to assess work needs for the day.
  • ​Worked overtime, including evenings and weekends, to respond to emergencies and fix unsafe conditions.
  • General up keep of facilities, changing of faucets and minor carpentry
  • Replace of exhaust fans and ice maker repair​
  • Managed work with little supervision.
June 2004 to August 2006
Zep Manufacturing Desoto, TX Industrial Maintenance Mechanic
  • Performed weekly maintenance assessments.​
  • Cut, fit, and welded metal components such as; plate, structural shapes, and pipes.​
  • Notified supervisors of faulty operations and defective materials.​
  • Maintained inventory for central warehouse of tools and supplies.​
  • Kept supervisor informed of job progress and material requirements.
  • Participated on Fire rescue team.
  • Monthly check of emergency exit signs and sprinkler systems.
Education and Training
North Lake Community College
Irving, TX, Dallas
Industrial Motor Controls
2012
Linsey Cooper School of Refrigeration
Irving, TX, Dallas
Air conditioning, heating, and refrigeration
Certification in HVACR
2003
Forrest Echoes Technical Institute
Crossett, AR, Ashely
Industrial Equipment Maintenance
Technical Dipolma in Industrial Equipment and Maintenance
1997
Strong High School
Strong, AR, Union

High School Diploma
Certifications

HVAC Certification

Forklift Certification

Industrial equipment maintenance Certificaiton
This resume is created in 7 minutes.
Professional Summary

Dedicated Diesel Mechanic with 6 years experience in Heavy Equipment and commercial vehicle repair and maintenance Familiar with safety standards and all manner of repairs . Consistently adhere to O.E.M and Company standards for maintenance and repair work . 


Work History
02/2018 to Current
Field Service Mechanic Earthmoving Equipment Australia Arndell Park, NSW

  • Inspect,service,repair Case Construction equipment in the workshop and in the field 
  • Service and maintain various brands Excavators and Trucks  
  • Worked irregular shifts to minimise down time to plant 
  • Followed all safety regulations and helped others do the same 

10/2017 to 02/2018
Field Service Mechanic JC Excavations Australia Pty Ltd Wetherill Park, NSW

  • Inspect,service,repair Heavy plant equipment on site 
  • Service and maintain various brands excavators and trucks  
  • Worked irregular shifts to minimise down time to plant 
  • Followed all safety regulations and helped others do the same 

03/2015 to 05/2017
Diesel Mechanic Celtic hose Ltd Carrick-On-Suir, County Tipperary

  • Inspect,service,repair Mobile plant and fixed plant equipment, Attend emergency call outs 24/7
  • Service hydraulic components 
  • Weld joints and fabricate parts to complete repairs 
  • Operate diagnostics to find fauts , repair and reprogram electrical systems 
  • Followed all safety regulations and helped others do the same 

09/2012 to 03/2015
Diesel Mechanic Rolor Commercials Ltd County Kilkenny

  • Inspect,service,repair and preventive maintenance to Trucks and trailers and agricultural machinery 
  • Perform preventive and scheduled maintenance repairs 
  • Service hydraulic components
  • Weld and fabricate parts to complete repairs 
  • Worked irregular shifts to minimise down time to plant and trucks attend emergency call outs 24/7
  • Operate various diagnostics Systems to find faults , repair and reprogram electrical systems  
  • Followed all safety regulations and helped others do the same 

Education
2016
Level 6 Advanced Certificate : Craft-Heavy Vehicle Mechanic
Education Training Board - Dublin, Ireland
QQI

Level 6 advanced certificate 

Craft- Heavy Vehicle Mechanic 

2016

Skills

  • Heavy equipment operation
  • Excavator ticket
  • Front end loader ticket

  • EWP Ticket 
  • Working at heights Ticket
  • HR,C class driving license