Maintenance Electrician resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

Build Your Resume
This resume is created in 7 minutes.
Summary
Attended the Norfolk Naval Shipyard apprenticeship as a crane maintenance electrician from 2002-06. Graduated in 06' as a journeyman electrician.  Worked at NNSY for a total of 11 years as a dedicated and proficient electrician with extensive experience in performing preventive and corrective maintenance on Amclyde portal cranes, Caterpillar mobile cranes, and bridge cranes in an industrial environment. Also have extensive experience operating category III non-cab operated bridge cranes, JLG 80', 120', 150' aerial work platforms, and forklifts.
Skills

  • Electro-mechanical proficiency
  • NEC code book proficiency
  • Electrical blueprint reading
  • AC/DC power and control systems
  • Test equipment operation
  • Diagnostic testing
  • Test and troubleshoot motors, generators, solid state devices, and power supplies
  • Cable removal, installation, testing, hanging, and banding
  • Familiar with Radiological controls
  • Forklift proficiency
  • Aerial work platform operator 30, 60, 80, 120, and 150, articulating and straight booms
  • Extensive use of fall protection equipment
  • Category III non-cab crane operator
 
  • Aware of electrical safety standards, familiar with lockout/tagout 
  • Familiar with crane hand signals
  • Knowledge of crane controllers, crane mechanics, and routine maintenance procedures
  • Familiarity with digital and computerized components, relays, contactors, resistors, breakers, transistors, diodes, etc.
  • Fabrication of conduit and installation of conduit runs from lights, motors, heaters, panels, junction boxes, travel horns, AC units, etc.
  •  Familiar with the use of electrical hand tools, and test equipment
  • Used laptop workstations to troubleshoot and repair whip, main, boom, and travel function control panels
  • Familiar with the disassembly/reassembly, operation, and maintenance of collector rings
Experience
Crane Maintenance Electrician
October 2002 to July 2013 Norfolk Naval Shipyard － Portsmouth, VA I have 11 years experience of working in a heavy industrial environment as a Code 730 maintenance electrician for Norfolk Naval Shipyard. During that time, I was involved in every aspect of electrical crane maintenance from disconnecting diesel powered generators to facilitate removal and replacement, to removing and installing circuits, conduits, air conditioners, lights, contactors, motors, travel horns, resistors, transformers, sound powered phones, junction boxes, and controllers. I also assisted in a variety of other mechanical based jobs such as removing crane hooks, removal of travel motor seals, replacement of oils and fluids, and removal and installation of brakes on motors. Throughout my apprenticeship at NNSY, I became highly experienced with lockout/tagout procedures, OSHA regulations, the use of fall protection harnesses, and the importance of wearing personal protective equipment. I also frequently collaborated with the engineering and inspection departments to trouble shoot problems within various electrical control circuits, such as bad transformers, malfunctioning hoist motors, and inoperable dead man switches. After my apprenticeship I continued internal shipyard education through the Code 700 training department to keep my skills sharp, and to stay on top of my responsibilities as a crane maintenance electrician.
Education and Training
High School Diploma : general studies, 1996 Great Bridge High School － Chesapeake, VA, United states
Journeyman Marine Electrician Card - Certificate of Completion of Apprenticeship : Electrical apprenticeship, 2006 Norfolk Naval Shipyard Apprenticeship － Portsmouth, VA, United States
Certificate of Completion : General studies - Track I curriculum, 2006 TCC － Portsmouth, VA, United States This was completed in conjunction with my apprenticeship program
References
Steve Cantrell - Crane Maintenance Division Head at NNSY - (office)
 
Shane Salanga - Crane Inspection Code 720 at NNSY - (office), (cell)
 
Brian Mundie - First Class Rigger at Lyon's Shipyard - (cell)
 
Brandon Fox - IT Specialist at Specialized Solutions - (cell)
This resume is created in 7 minutes.
Objective
To attain a Journeyman Operator Maintenance position and use extensive experience and training to contrubute to the success of Pacificorp.
Skills
Work History
Plant Maintenance Electrician (Licensed Journeyman) 02/2007 to Current
Devoge Electric – Hunter, Carbon and Huntington Power Plants (IBEW L.U. 354)
  • Complete daily work orders and PMs.
  • Troubleshooting and metering form prints and electrical diagrams, maintaining proper and safe operation of electrical systems, solenoids, electronics, circuit breakers, fuses, control circuits, PLC's, switches, exciter brushes, power cables and various other aspects of the electrical field
  • Taking oil samples on circuit breakers in switch yard and main transformers
  • Performing preventative maintenance on OCB's by checking air pressure, oil levels, air compressor belts and heaters
  • Hanging grounding cables on main transformers and bus duct for tag out procedure 
  • TTR testing on transformers
  • New construction, upgrades and retrofits
  • Installation of new electrical systems and components Including: Four (4) DCS upgrades to Emerson Ovation, CEM's Enviromental Monitors on all stacks at Carbon, Hunter and Huntington, Acoustical Monitors and Low NOx System on Hunter and Huntington Boilers, Steam inerting, Excitation on U2 Carbon Generator, Annunciator Projects at Carbon and Hunter, Control room relocation at Hunter. New bottom ash drag chain at Huntington
  • Various lighting projects, transformers, circuit breakers, meggering motors, compressors, UPS.
Farm Hand 05/2006 to 08/2006
Pacificorp Research Farms – Castle Dale, UT
  • Changing wheel line irrigation pipe
  • Gathering and recording watering data
  • Performing light maintenance of farm equipment, generators, vehicles and charging batteries
Ironworker Operator 10/2006 to 12/2006
C.O. Building Designs – Ephraim, UT
  • Precisely measure and cut steel base plates for steel buildings
  • Precisely measure and punch holes in base plates
  • Operate overhead hoist and rigging loads
  • Keeping a daily log of production
Education
Journeyman Inside Wireman Electrician : Feb 2007 to Aug 2012 Ogden-Weber Applied Technology College - Ogden, UT
  • Completed all 5 years of training 
  • Completed IBEW Code of Excellence for Construction and Maintenance
General Education: Construction Management Jan 2006 to May 2006 Snow College - Ephraim, UT
High School Diploma: May 2003 Emery High School - Castle Dale, UT
This resume is created in 7 minutes.
Summary
Six (6) + years of experience as an E/I maintenance technician and five (5) years currently in supervision. Experienced in designing, installation, maintenance, and repairing of electrical related devices with NEC codes and accordance with facility code requirements. Installation and maintenance of medium and low voltage switch gears, motor control centers, motors, panel boards, transformers, generators, grounding, exothermic welding, lighting systems, variable speed drives, utilizing communicators and process meters to perform testing and calibration of various instruments. Experienced in Allen Bradley and Siemens DCS systems.
Skills
  • AC/DC power control systems
  • VFD Installation
  • Allen Bradley PLC efficiency 
  • Instrumentation loops
  • DCS control and configuration
  • Monitor control systems
  • MS Office/MS Excel/ MS Word
  • Good communication and computer skills
  • Safe and meticulous work practices 
  • NFPA 70E Trained
  • Infrared camera level 1 trained
  • High voltage breaker maintenance
Experience
Electrical Superintendent Sep 2014 to Current
 ARDENT SERVICES, LLC － Kenner, Louisiana
  • Coordinate policy and procedures with client, scheduling, and produce updated tracking data progressively.
  • Reviewing capital projects from engineering phase to construction, followed by testing and loop checking.
  • Responsible for trouble shooting and diagnosis of complex malfunctioning motors, lighting fixtures, transformers, preparing power schematics drawing, and red lining revisions as needed.
  • Ensure that maintenance recording is done constantly on all electrical equipment.
  • Install jobs as per IFC drawings and NEC code.
E&I Technician Dec 2009 to Sep 2014
 EIU
  • Constructed I.M.T.T's largest dual load/unload ship dock with vapor combustion unit.
  • Provided I/E maintenance training to familiarize plant electricians of the new systems completed.
  • Installed 13.8 switch gear and main medium voltage disconnect to feed Dock 14.
  • Completed daily work orders issued by maintenance coordinator.
Maintenance Electrician Dec 2005 to Dec 2009
 EVONIK / STOCKHAUSEN
  • Troubleshooting, inspection, and installation of motors, motor starters, level pressure and flow transmitters.
  • Repair, replace, and test 480v, 4160v motors, starters, and breakers.
  • Test, calibrate dust collectors, dust switches, level probes, vibrating conveyors, photo eyes, pallet stacker, weight scales, and REX radar level gauges.
  • Repaired and calibrated O2 analyzers and treated river water analyzers.
  • Installed, repaired, and maintained EVONIK'S Allen Bradley DCS system.
Education and Training
1994 Destrehan High School Northwestern State University － Destrehan New Orleans, LA, United States
Northwestern State University － New Orleans, LA, United States 1 Athletic scholarship
Industrial Electrical Tulane University － New Orleans, LA, United States Transferred to Tulane University (1)
Electrical Instrumentation 1999 River Parish Vocational School － Reserve, LA (1) Completed Electrical and Instrumentation
Certification
  • Louisiana State Licensed Electrician, LIC# 48259 (Since 2001)
  • NCCER certified Electrician
  • LSU first responder training 1998
  • General generator certified service, and repair
  • Proficiency in NFPA 70E and OSHA regulations and standards
This resume is created in 7 minutes.
Summary

Dependable , hardworking, respected and ethical electrician journeyman who stays current with public safety and security standards, as well as being up to date on codes, with more than 25 years working and training others in the electrical industry.

Highlights
  • Earned Class A journeyman license with a score of 96%.
  • Trained in industrial controls.
  • certified in computer network.
  • experienced with boilers.
  • extensive knowledge in security systems and fire alarms.
  • trained in CPR and multimedia first aid.
  • Leadership
  • Strong communication skills
Accomplishments
  • Individually received Excellence in Service Awards from Hormel Foods for the last 10 years.
  • Key player on residential and commercial projects.
  • Successfully trained numerous apprentices who have become respected journeymen.
  • Licensed with the state of Minnesota as a class A journeyman Electrician
  • Computer network cat 3 through cat 6 installation and fiber optic installations with 4 different manufacturers. Corning, Hubbell, Leviton, and Panduit.
Experience
Journeyman Electrician
May 1990 to Current Fox Electric － Asutin, MN

Extensive electrical design, installation, and repair of residential, commercial, and industrial facilities. Mentor and train apprentices, as well as, consult and advise fellow electricians.
Maintenance electrician
May 1989 to May 1990 Streater － Albert Lea, MN

Electrical maintenance of Streater manufacturing buildings (3) and equipment. promoted to maintenance supervisor in 1990.
Apprentice Electrician
May 1988 to May 1989 Fox Electric － Austin, MN

construction and building maintenance.
Education
Certificate general Electronics, 1986 Riverland Tech － Austin, MN, USA
Electrician, 1988 Riverland Tech － Albert Lea, MN, USA

Diploma Received.
High School Diploma : 1985 Lyle High School － Lyle , MN, USA

Try our Resume Builder!

You can import the CV as a PDF file or publish it on the website and Make My Own Resume will be collecting the data about the success of it. You will see the graph that will reflect the popularity of your CV and will provide you a detailed report on how many employers were interested.

Targeting other Construction? See one of our examples: