Choose and edit as your own
Get inspired by the best resume examples picked for your profession and create your!
Add pre-written phrases
Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us
Save and Download your Resume
Save it in PDF format. Ready-to-sent to you employer!
I am a Journeyman Transmission Foreman / Linesman with 18 years Experience in the Industry in the UK and Canada. I completed my City and Guilds UK Trade Certificate for Transmission Linesman.
I feel I have a lot to offer with My Experience and knowledge and have 10+ years as a Mentor to Apprentice Linesman. My Experience covers a Wide Range of Skills from Grounding to Running a Stringing Crew. I have Worked Directly or Sub Contracted for Companies such as National Grid, Altalink, SNC Lavalin and Sask Power.
Project Management. : Motivated and Safety Conscious. : 16+ years Experience in the Transmission Field. : 10 years of Mentored Apprentice Linemen. : Trustworthy and Reliable Team Member who Embraces the Safety Culture. : Awareness of the Importance of meeting Deadlines in a Safe, Cost Effective manner and on Schedule. : Experienced in Working in a Wide range of Environments including High Risk area's with the Potential Risk to the Workforce, Public and the Environment. : Sound Knowledge of Hazard and Incident Reporting procedures and Health and Safety. : Proven Flexibility in order to meet the demands of the Industry. Travel, Unpredictable Weather and Conditions, varied Work Patterns and being away from home for an extended period of time are the Challenges of the Industry.
: Permanent Residency Status in Canada. Valid Drivers License with a Clean Abstract.
: Altalink Trained:
Receiving Reclosure Blocks on Lines.
Accepting GOI's on Lines.
Installing and Removing Grounds on Transmission Lines.
Developing and Reviewing Grounding Plans on Lines.
I started Working for Rokstad Power in November 2016 on the Brucejack Mine Project. My Daily duties varied from Working at the Fly Yard to Dead Ending and Sagging Conductor at DeadEnd Structures. Due to the Nature of the Work and the Location all Works involved Helicopter Access into Sites. Hoist and Skid Transfer directly on to Structures. I was involved in Flying Hardline and Stringing Steel Conductor in a 14 Span Pull over a Mountain Range and a Glacier. Daily Tailboard Meetings were necessary and Avalanche Prevention Training given on site.
I was Hired for Balfour Beatty to oversee the Installation and Use of the Catenary System that Balfour Beatty had Developed any years ago. This System was used to String Twin - Single Bundled ACSR Conductor over Homes, Businesses, Roads and Railways. I was dealing with the Public and Clients such as Network Rail on a Daily Basis and Holding Closure Permits. I was part of a Platform Access Crew who's duties included Stripping Out Twin Conductor ready for Pulling. Sagging, Soft and Hard Side Dead Ends. Jumpering and Stringing OPGW Wire on the Earth Wire.
I was Hired for Electricity Networks NI to oversee some Tower Inspections including Tower Furniture assessment and Replacement. Re Insulation on Twin Conductor and Re Spacering using a Powered Spacer Trolley.
My Duties as a Foreman / Linesman included completing and updating Daily Safety Paperwork and Tailboards for the Day\'s tasks. Stringing Single, Twin and Quad Phase Bundled Conductors with varied Voltages from 138,000 - 500,000kv. Also Stringing OHSW and OPGW.Working with Cranes, Bucket Truck\'s and Helicopters on a daily Basis to access Structures while Blocking, Sagging, Clamping In, Jumpering, Dead Ending and Conductor Termination and Sub Stations where Downleads and Droppers were fitted. Tower Assembly and Erection with Helicopters and Cranes, Back Bolting and Tower Inspection.Framing and Setting Wood Poles. Communicating with Multiple Crews doing Different Tasks to obtain the Highest Level of Safety. Field Transit Trained for Sagging Phase Conductor\'s on Single, Twin, Quad, OHSW and OPGW.
As a Chargehand / linesman I held various Permits For Work for National Grid and was part of a 24 Man Stringing Crew. Stringing Single, Twin, Triple and Quad Bundled Conductor capable of Voltages ranging from 132,000 - 400,000kv. Stringing OPGW and Fibre Optic Wrap on Earth Wire. Tension Stringing while Adjacent Circuit Live and GAP Wire Trained.Blocking, Tie In, Sagging, DeadEnd and Conductor Termination at Sub Stations. Jumpering and Downleads into SS and Ceiling End Platforms.Steel Replacement and Tower Assembly and Erection with Cranes and Derrick.Rapid Rail Installation and Removal.Winch and Tensioner Site Trained, Equipotential Zone\'s.
My Daily Duties as an LE2 Linesman were being part of a Stringing Crew and Steel Replacement. Spacer Removal and Installation on Twin, Triple and Quad Bundled Conductors using Powered and Manual Spacer Trolley's. I was involved in the Development of the SkySafe Catenary System in Partnership with National Grid. I was also involved in the Development of the New Earth Wire Derrick for replacing Tower Tops with 1 or Both Circuits Live.
I started on the Trainee Linesman Programme in Partnership with National Grid. After Successful completion of this program I attended the Competent Persons Course at Earring (National Grid). I was part of an Earthing, Grounding party on 275,000kv Structures and twin Bundled Conductor.Steel Assembly and Erection, Step Bolting and Tower Furniture Replacement.All aspects of being part of a 24 man Stringing Crew, Blocking, Tie In, Tower Access Platform and Pladder. Sagging, Soft and Hard Side Dead Ends.
Day to Day running of a 4 man Crew for Deadening and Sagging Phase Conductors, OHSW and OPGW.
Daily completion of Tailboards and Risk Assessments for various tasks involved in Tension Stringing.
Also My Crew and I have been Sagging Conductors using Transit sagging Methods in Manitoba on the BI Pole Projects and Newfoundland.
I have just completed the Tower Rescue and Fall Arrest courses for these Provinces.
|I have good customer service.I am good in all General patch, sanding, caulking & priming, painting that I am tasked to perform. I know what to look for when doing Fire Penetration PM' s. I am good in tape and float, painting and prepping walls and other items ready for paint.
Inventory, inspect, repair and test Frac iron. Remove, replace used iron from transport trucks and Frac pumps.
Install and maintain communications package tailored for each customer utilizing while providing support through effective troubleshooting and thorough communication about issues and solutions. Package includes satellite and cell tower based internet services, cell phone boosters, routers for network/internet access expansion, and/or intercom phones for point to point communications onsite.
Assess new, remanufactured, and damaged parts for compliance. Inspect and ensure quality of repairs by technicians.
Maintain facility safety in compliance with federal, state, local, and company safety and environmental regulations.
Disassemble and repair manual and hydraulic Frac valves. Assess removed parts for damage and replace or repair as necessary. Complete Hydrostatic test to ensure proper functionality and adherence to specifications.
Deploy and maintain voice/data/video network infrastructure and cryptographic equipment in fixed and deployed environments. Maintain and operate systems through effective troubleshooting, repair, and preventative maintenance to minimize equipment downtime and ensure mission effectiveness. Utilize technical data and diagrams to perform component level maintenance, preventing the need to send equipment to advanced system specialists.
Field Operator with 16 years of experience in the oil and gas industry with multiple safety and audit awards seeking to obtain a position in which my knowledge and experience can be fully utilized. The core aspiration is to further my education, training and work-place experiences and grow as an individual with a great organization.
Served on call 24 hours to participate in training drills and department meetings
Performed search and rescue of victims
Engaged in fire prevention activities on assigned shifts
Preservation of life and property through mitigation of fires, disasters, and medical emergencies
Supported all efforts with regard to fire, mass casualty incident, natural disaster, environmental disaster or Act of God
Performed cleaning and maintenance of firefighting equipment
Performed basic firefighter skills during fireground operations
Performed in a probationary capacity under emergency situations, fire suppression, emergency medical services, also fire prevention, public education, vehicle and station maintenance