Meter Reader resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Summary

Skilled electrical worker ready for a long term career. Extremely hard worker and quick learner. Great at working under pressure. I take pride in any job I do and strive to be the best at it. I have a strong passion for linework and look forward to spending the next 30+ years mastering it.

Highlights
  • Problem-solving skills
  • Very Coachable
  • Skilled Climber with Gaffs and Belt.
  • Class A CDL w/ airbrakes
  • Working Safely
  • OSHA 10 Certification
  • Dependable independent worker
  • Bucket truck, boom truck, digger derrick experience
  • Hand tool, power tool troubleshooting experience.
  • Good at following instructions.
  • Consistent work history
Accomplishments

Perfect Safety Record

  • Maintained 100% on inspections from safety personell.  No incidents or near misses reported in 3 years of potentially hazardous working environments.

Major Storm Restoration

  • Assisted in Power Restoration from Hurricane Matthew. Helped with multiple local storms with AEP Benton Harbor and Buchanan locations working. Restoring power as quickly and safely as possible.
Education
2013
Lineman Academy Lake Michigan College Benton Harbor, Michigan, United States
Field Training
  • Sagging wire, changing insulators, hang, make-up and troubleshoot transformers and powerbanks, remove and hang crossarms, splicing cable and down line repair scenarios, removing and setting poles, complete line build and takedown, changing fuses, long-sticking, grounding, working with a digital multimeter, underground locate, fault location and repair, running a service to a house and installing and testing meters. 
  • 80 hour internship with AEP Line Crews

Classroom/Lab

  • Blueprints and schematics
  • Basic AC/DC electric
  • energy production/distribution
  • Rigging
  • Motors and controls
2009
High School Berrien Springs High School Berrien Springs, MI, United States
Work Experience
04/2018 to Current
Electrical Apprentice Beaudoin Electrical Construction Inc Sodus Township, MI Electrical Construction Contractor. Mainly commercial new construction, renovations and service. Bending conduit, wiring transformers, pulling wire, performing load calculations. Low Voltage/data work, for teacher stations and hospital communications, terminating and pullling cat5e, cat6, fire alarm wire, security cameras, fiber optics, communication bridges, High Voltage Feeds, and lights. Lift station maintenance, removing, and replacing pumps. Operating Trencher, Aerial Lifts, Excavator, and hauling equipment.
09/2017 to 04/2018
Electrical Technician Eagle Technologies Bridgman, MI Complete electrical build on automated machines.  Laying out and wiring electrical panels.  Install and wire switches, sensors, cameras, monitors and controllers on machines. Routing and terminating electrical wires and Ethernet cables. Wiring and testing motors and robots, soldering. Test and debug of proximity switches and valve banks. Tear down machine and travel to customer locations to install machines and monitor the run.
06/2016 to 09/2017
Apprentice Lineman Electricom LLC Paoli, IN New Powerline construction. Framing poles, leaning poles, setting poles. Operating rope pulling machine. String, sag, and tie-in new wire. Transferring equipment, wrecking out old wire, hardware, and removing old poles. Working as a groundman assisting Journeyman Lineman.  Driving Digger and bucket trucks, performing daily truck inspection making sure operationally safe and properly stocked. Operating Digger-Derrick truck to dig holes, set poles in the ground, set anchors and load and unload poles. Temporary foreman for framing crew. Travelling to perform power restoration in major storm/hurricane scenarios. Attend daily tailboard meeting/job brief and always maintain a safe working environment.
11/2015 to 05/2016
Line Mechanic D Indiana Michigan Power Benton Harbor, Mi

Lineman Apprentice. Stocking material and maintaining trucks Operating and driving bucket truck, digger derrick, track machine and backyard machine. Replacing broken poles, bad transformers, troubleshooting, repairing underground and overhead lines and all associated equipment. Replacing and installing streetlights, climbing inaccessible poles with gaffs and belt. Installing new poles, transformers and new customer services. Reconductoring and complete new construction, operating ropes and pulling machines. Participating in Storm restorations and customer outages. Completing AEP mandatory school and training in Ohio.

09/2014 to 11/2015
Meter Reader Consumers Energy Kalamazoo, MI

Work outside in all weather conditions. Read and record customer gas/electric usage. Inspect gas and electric meters for signs of damage, theft, gas leaks, and report findings to proper personnel. Inspect padmount transformers, locate new meters and properly input them into the handheld computer device, drive/walk to customer meters per day in all weather conditions, answer all customer questions, if not able refer them to someone who can, barricade/guard down wires in storm scenarios.

06/2005 to 09/2014
Manager/Maintenance lead Hardings Market Eau Claire, MI

Family Business. I began working at the age of 14 performing odd-jobs and helping my grandfather with maintenance. By 17 I was promoted to manager and took over maintenance. Opened up the store, made bank deposits, book keeping and ran cash registers. As well as ran the forklift unloaded trucks, Made sure the customers were happy and the employees were working as they should. Performed all the maintenance in the store ie; repairing and maintaining coolers and freezers, box crushers, replacing ballasts, and tiling.

This resume is created in 7 minutes.
Professional Summary
  • Flowback Operator Helper . Doing stages on frac well, to drillouts , then completion stages on well. Rigging up each job style , performing job in a timely and safe manner. Sending reports as needed. Communication with others.
  • Waste water plant operator Monitor operating conditions, meters, and gauges,Collect and test water and sewage samples. Record meter and gauge readings and operational data.Clean and maintain equipment, tanks, filter beds, and other work areas.
  • Flowback Operator Helper: Performing stages on frac well,  drillouts, and completion stages on well. Rigging up-down each job location and performing job in a safe and timely manner. Sending reports as needed. Effective Communication  with others.
  • Waste water plant operator Monitor operating conditions, meters, and gauges,Collect and test water and sewage samples. Record meter and gauge readings and operational data.Clean and maintain equipment, tanks, filter beds, and other work areas.
Skills
  • Team liaison
  • Self-motivated
  • Strong verbal communication
  • Conflict resolution
  • Extremely organized
  • Team leadership
  • On time
  • Forklift Knowledge
  • Man lift knowledge
  • Ability to work long hrs
Work History
Flowback Helper, Extreme Well Testing Kermit, TX
  • Assist Operator in rigging up pipe from wellhead to manifold then to water tanks 2" or 3" . Doing work in a safely and timely manner.
  • Also working with coil jobs and drillouts , assist in rigging up pipe from wellhead to plug catcher to sand trap to manifold to water tanks.
  • Reporting everything to head operator keeping good communication with other operators.
  • 6  months of experience 
Well Tester, 11/2017 to Current
Oil States Energy Services Monahans, TX

Rigging up/down jobs for Sales drill outs, TCP, fracs, mill outs, observe meters and pressure gauges to regulate quantity and consistency of seperater  and to control pump pressure.Mapping out layout of job before rig-up communicating with company reps/OSR's. Responsible for all paper work including tickets and safety daily JHA/JSA and my crews bi-weekly time sheets. All mud scale, PH balance, Fractometer, water samples for well and company reports that need to be forwarded to company reps/ engineers.

Flowback Helper, Extreme Well Testing Kermit, TX
  • Assist Operator in rigging up pipe from wellhead to manifold then to water tanks 2" or 3" . Doing work in a safely and timely manner.
  • Also working with coil jobs and drillouts , assist in rigging up pipe from wellhead to plug catcher to sand trap to manifold to water tanks.
  • Reporting everything to head operator keeping good communication with other operators.
  • 6  months of experience 
Restraint Tech, Flare Well Testers San Angelo, TX
  • Will work at well site locations assisting in safely rigging up/rigging down and the monitoring of the flow line safety restraint system.
  • While frac was down would remove restraints so iron would be taken apart so frac pump would be worked on.
  • Making sure everything was put back correctly before starting frac.
  • 3 yrs of experience 

Waste Water Plant Operator, City of McAllen McAllen, Tx
  • Add chemicals, such as ammonia or chlorine, to disinfect water or other liquids
  • Inspect equipment on a regular basis
  • Monitor operating conditions, meters, and gauges
  • Collect and test water and sewage samples
  • Record meter and gauge readings and operational data
  • Operate equipment to purify and clarify water or to process or dispose of sewage
  • Clean and maintain equipment, tanks, filter beds, and other work areas
  • Follow U.S. Environmental Protection Agency regulations
  • Ensure safety standards are met
Meter Reader, Agua S U D Mission, TX
  • Read  water consumption meters and enter data in route books or hand-held computers.Enter information into databases or software program
  • Walk or drive vehicles along established routes to take readings of meter dials.Operate vehicles or material-moving equipment.
  • Upload into office computers all information collected on hand-held computers during meter rounds, or return route books or hand-held computers to business offices so that data can be compiled.

Upload into office computers all information collected on hand-held computers during meter rounds, or return route books or hand-held computers to business offices so that data can be compiled.


Upload into office computers all information collected on hand-held computers during meter rounds, or return route books or hand-held computers to business offices so that data can be compiled.


Upload into office computers all information collected on hand-held computers during meter rounds, or return route books or hand-held computers to business offices so that data can be compiled.


Education
High School Diploma: 1998
Edinburg High School - Edinburg, TX
Reference
Nancy Zapata -
Albert Alonzo -
Ivan Calderon -
This resume is created in 7 minutes.
Professional Summary
Experienced mechanically and committed to maintaining cutting edge technical skills and up-to-date industry knowledge.
Skills
  • Good problem-solving abilities
  • Quick learner
  • Good communication skills
  • Strong mechanical aptitude
  • Innovative thinker
  • Detail-oriented
  • Computer proficient
  • Strong mechanical skills
Work History
Meter Reader, 02/2018
National Fuel Gas Distribution Corporation Erie, Pennsylvania, United States
  • Learned, referenced and applied product knowledge information.
  • Examine and read gas meters from inside and outside areas.
  • General knowledge about natural gas and safety issues working around natural gas.
Youth Counselor and Building Maintenance, 09/2016 to 05/2017
Take A Break Inc Lafayette, CO
  • Maintain facility.
  • Meet request of staff for 32 staff needs Meet needs of children Pick up and drop off of children at proper locations.
  • Maintain a prosperous and comfortable atmosphere for the children.
  • Assembler, 11/2011 to 01/2016
    General Electric Transportation Erie, PA
    • Assembly of locomotive propulsion frames.
    • Winding of DC armatures.
    • Winding and Assembly of OHV (off highway vehicle) stator frames.
    Maintenance Mechanic, 08/1999 to 11/2011
    Welch Foods Inc PA
    • Preventative maintenance of the food manufacturing machines, i.e,Stork, Krones, Hartness and Anchor Hocking.
    • Electrical/Mechanical trouble shooting and basic electrical knowledge of machinery.
    • Change over of lines and adjustments for different products to run.
    • Line start-up and operation of the food manufacturing machines.
    • Industrial Maintenance.

    Industrial Maintenance, 05/1995 to 08/1999
    Trost Manufacturing Co Erie, PA
    • Mechanical and electrical preventive maintenance on industrial machinery, i.e, Trumpf press and Cincinnati CNC lasers.
    • Implementation of new machines into building.
    • General Maintenance of building and grounds.
    Education
    Associate of Applied Science: Maintenance Electricity and Construction, 1995
    Triangle Tech - Erie, PA

    • Trained in electrical knowledge of transformers, motors and PLC\'s
    • Trained in industrial, commercial and residential wiring
    • Graduated with "High Honors"
    • Associate\'s Degree

    High School Diploma: 1990
    Harbor Creek High School - Harborcreek, PA
    Accomplishments
    • Safety Team, collaborated with team in the development of providing a safe work environment.
    • Maintenance Improvement team, which led to greater efficiency and effective solutions.
    • Attained status of "Technician", highest possible scale achievable working at Welch Foods Inc.
    This resume is created in 7 minutes.
    Professional Summary


    Organized Pipefitter who effectively manages simultaneous projects. Precisely follows directions and works safely and efficiently to produce quality results.

    Skills
    • Self-motivated
    • Strong verbal communication
    • Skilled with both hand and power tools
    • Safety knowledge
    • Works well independently
    • Defensive driver training
    • Safety Oriented
    • Creative problem solver
    Work History
    Customer Service Representative, 09/2009 to 02/2013
    Target Santa Ana, CA
    • Greeted customers entering the store to ascertain what each customer wanted or needed.
    • Described product to customers and accurately explained details and care of merchandise.
    • Politely assisted customers in person and via telephone.
    • Answered product questions with up-to-date knowledge of sales and store promotions.
    • Assisted customers with food selection, inquiries and order customization requests.
    • Developed reputation as an efficient service provider with high levels of accuracy.
    • Investigated and resolved customer inquiries and complaints in a timely and empathetic manner.
    • Helped drive sales goals and achieve monthly quotas.
    Meter Reader, 03/2013 to 10/2014
    So Cal Gas Santa Ana, California
    • Demonstrated professionalism and courtesy with customers at all times.
    • Resolved customer issues in a clear, courteous and straightforward manner.
    • Followed up with clients to ensure optimal customer satisfaction.
    • Compiled and accurately entered electronic data.
    • Obtained Triple Crown status numerous months for meter reading accuracy
    Automated Meter Installer, 10/2014 to 03/2016
    So Cal Gas Los Angeles, California
    • Repainted and precisely touched-up components and assemblies.
    • Correctly and safely used a variety of hand tools, saws and cutting equipment to carry out job duties.
    • Obtained appropriate tooling and fixtures.
    • Utilized safe work practices during job duties by wearing proper protective equipment.
    • Repaired gas leaks and replaced worn fittings to prevent unsafe future conditions
    Energy Technician Residential Apprentice, 03/2016 to 09/2017
    So Cal Gas Santa Ana, California
    • Assembled and installed a variety of valves and fittings.
    • Eliminated risks by correctly identifying potential safety hazards.
    • Repaired plumbing systems, components and equipment.
    • Completed preventative maintenance on water heaters, furnaces, ranges and plumbing fixtures.
    • Dismantled machines and equipment to remove defective parts with the use of tools such as wrenches and screwdrivers.
    • Performed safe work practices when using tools and ladders.
    • Ensured superior customer experience by addressing customer concerns, informing the costumer of work performed and resolving problems on the spot.
    • Provided a wide variety of maintenance and repair work on costumer gas appliances as well as identifying potential hazards.
    Education
    High School Diploma: 2008
    Valley High School - Santa Ana, CA