Mill Operator resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Objective

A challenging position, utilizing abilities developed through my experience, with the

opportunity for professional growth based on performance.

Equipment Operated Efficiently
  • Loader Caterpillar 992,950g, IT-138
  • Bobcat,Caterpillar All Series Skid Steers
  • Forklift, Telescopic Handler
  • Water Truck
  • Vacuum Guzzler Truck
  • All heavy farming equipment
Work Experience
10/2017 to Current
Process Reagents Operator Newmont Phoenix Mine Battle Mountain, NV
Perform daily routine pre op inspections report safety and environmental hazards immediately. Follow SOP's inspect chemical reagent totes and offload areas for delivery trucks, observe safe connection when offloading to proper storage tank. Inspect all pumps and troubleshoot if needed safely by following lock out tag out procedures. Inspect filter press plates, change filter cloths and replace core gaskets and reject corners if needed adjust timers on PLC to operate more efficient. Check slurry level on high rate fines thickener adjust flocculant if needed to improve settling rate. Monitor density and make adjustments if needed inspect tailings dam facility.
12/2015 to 10/2017
Process Mill Operator Newmont Phoenix Mine Battle Mountain, NV Perform daily pre operational inspections throughout plant facility ensure there are no safety hazards or environmental spills. Inspect centrifugal pumps operation, maintenance and troubleshooting, inspect cyclone cluster, hook up mill inch drive for inching ball mills to break the load or for maintenance work. Inspect and change out panels on vibrating screen. Ability to perform proper lock out tag out in all required areas of equipment in grinding circuit.
09/2014 to 12/2015
Process Crusher Operator Newmont Phoenix Mine Battle Mountain, NV
Experience operating Metso Superior MKII Super Spider Gyratory Crusher (50x65 inch),FLSmidth Gyratory Crusher (60x75 inch),FLSmidth XL1100 Secondary Cone Crusher
Perform day to day pre operational inspections follow SOPs. Follow all environmental procedures and regulations and air quality permits for dust control ensure dust collectors or water spray systems are fully operational. Record data such as oil levels, psi, temperatures, monitor amperage on equipment. Operate crushing circuit consistently and safely, communicate good with other department personnel such as pit production and process maintenance. Ability to operate hydraulic rock breaker and use hydraulic hammer bit properly. Ability to lock out tag out proper equipment when spotting surge bin or digging out crusher dump pocket for maintenance.
10/2013 to 09/2014
Process Crusher Helper Newmont Phoenix Mine Battle Mountain, NV Perform day to day pre op inspections, inspect lube oil hydraulic levels for secondary and primary crusher motors, inspect conveyor belt systems, such as all rollers, idlers, misalignment arms, scrapers, and all safety devices on conveyor belt equipment. Inspect transfer chutes, screening plant panels, secondary cone crushers, apron feeders. Wear all the required PPE needed for each task. Perform safe clean up while working around conveyor belts that are running. Follow lock out tag out procedure when working on unplugging bins and hoppers,chutes as well as for energy isolation for down days.
03/2013 to 10/2013
Process Heap Leach Tech Newmont Lone Tree Mine Humbolt County, NV
Performed day to day pre operational inspections on mobile equipment. Follow good housekeeping practices, communicate and work safe with crew members while installing piping to leach pad, butt welding fuse polyethylene pipe, set up drip line, measure and assemble new header piping for new cells. Perform pad maintenance blow out lines, unplug sprinkler wobblers and flush out cell lines.
03/2013 to 10/2013
Process CIC Plant Operator Newmont Lone Tree Mine Humbolt County, NV
Perform daily routine pre operation and equipment inspections report safety and environmental hazards. Closely monitor daily evaluation control of barren solution pumps and water balance levels on all ponds desired water for plant operation. Transfer carbon out of CIC tanks, work safely gather sampling liquid solution for laboratory, record all plant operational data on spreadsheet as well as perform good housekeeping.
03/2012 to 03/2013
Robotics Technician/Maintenace Mechanic M.I Swacco Battle Mountain, NV

Maintain robotic bagger and palletizer system running in excellent condition. Maintenance when broke down following safe lock out tag out procedure. Reprogram system software set up parameter, set points, diagnostic trends. Manually perform jogging the robotic arm for examinations and maintenance positioning. 


06/2011 to 03/2012
Mill Helper/Mill Operator M.I Swacco Battle Mountain, NV

Mills Responsibilities Barite Plant troubleshoot problems on pumps, vessels and air compressor's.

Load PD Box Rail Cars and Bulk trucks with material

Keep Mills intact and running efficiently. How to power on and off the Mill safely. Maintenance on crusher conveyor when needed, operated skid steer for excessive clean up.

Education
2011
High School Diploma Battle Mountain High School Battle Mountain, NV, United States
This resume is created in 7 minutes.
Profile

i am a really dedicated worker with a lot of motivation and precision after i get to know the job. I am always trying to do better and learn more as i can. I like to take on more of a role with the company as i get use to it and move up .

Skills
  •  reliable
  •  dependable 
  • hard working
  •  always on time
  •  independent worker
  •  help others
Accomplishments
 perfect attendence award 
Professional Experience
12/2014 to Current
Team Leader Jack in the box San Jose, CA  cashier, cook, safe management, lead my understaff, maintence 
06/2014 to 02/2015
Head cook 5 guys San Jose, CA  grill cook, sauteed food , prep  food  and maintence
07/2012 to 06/2014
Shift Manager Burger King San Jose, CA prep, cook, maintence, inventory, safe  counts, computer work, and   lead my under staff  for  my shift everyday
02/2017 to 06/2018
Packaging Associate Sunbasket San jose, CA
Mill Operator Burke Industries Inc. San Jose, CA
Education and Training
2012
High School Diploma Gunderson High school San Jose, CA, Santa Clara
Food handler Cerification
This resume is created in 7 minutes.
Professional Summary

My career highlights and key strengths I feel are my exposure to the different aspects of a machine shop, in which I was able to be a part of.

I feel that my training in these various departments has made me more valuable in that I am willing to learn and through that willingness, I have acquired the skills and knowledge to become an effective employee and team member.


Work History
Packaging/Receiving Technician Titan Medical Mfg. - Bartlett, Tennessee 05/2013 - 08/2013

As a Packaging/Receiving Technician my objective was as followed:

*Ensure quality care and time efficient delivery of customer product.

Metal Finisher Titan Medical Mfg. - Bartlett, Tennessee 08/2013 - 05/2015

My objectives in Metal finnishing were as followed:

*Participate in finishing of metal devices with tools.

*Conduct free hand grinding and configured devices for finishing procedures.

*Assist in quality checks to managed finishing operations.

*Evaluate production process and executed quality standards.

*Formulate print specifications and maintained manufacturing documentation.

*Provide assistance to QA and engineering staff for finishing tasks.


Cnc Swiss Machinist Titan Medical Mfg. - Bartlett, Tennessee 05/2015 - 12/2015

As a Swiss Machine Operator my objective was as followed:

*Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T).

*Verify settings by measuring positions, first-run part, and sample workpieces; adhering to international standards.

*Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

*Update job knowledge by participating in educational opportunities. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Quality Control Techni Titan Medical Mfg. - Bartlett, Tennessee 12/2015 - 09/2016

As a Quality Control Technician my objective was as followed:

*Working in a variety of settings, responsible for maintaining quality-assurance processes, testing products, and recording and analyzing results data during product development and manufacturing. 

Shared Services Manager Finishing Innovations, Llc. - Mason, Tennessee 09/2016 - 02/2017

As Shared Services Manager my objective was as followed:

*Maintain work flow by monitoring steps of the process; setting processing variables; observing control points and equipment; monitoring personnel and resources; studying methods; implementing cost reductions; developing reporting procedures and systems; facilitating corrections to malfunctions within process control points; initiating and fostering a spirit of cooperation within and between departments.

*Complete production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring progress; revising schedules; resolving problems; reporting results of the processing flow on shift production summaries.

*Maintain quality service by establishing and enforcing organization standards. 


5 Axis Mill Operator Titan Medical Mfg. - Bartlett, Tennessee 02/2017 - 08/2017

As a 5 Axis Mill Operator my objective is as followed:

*Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). 

*Verify settings by measuring positions, first-run part, and sample workpieces; adhering to international standards.

*Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

*Update job knowledge by participating in educational opportunities. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.


Machinist Smith & Nephew Inc - Memphis, TN 08/2017 - Current


As a Machinist in Plastics my objective is as followed:

*Plan machining by studying work orders, blueprints, engineering plans, materials, specifications, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). 

*Verify settings by measuring positions, first-run part, and sample workpieces; adhering to international standards. *Maintain specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes.

*Update job knowledge by participating in educational opportunities. Accomplishes organization goals by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments.

Education
High School Diploma: Apostolic Academy - Ripley, Tennessee 2012
references

Colby Kenyon: Employer Titan Medical Mfg.

 

Kyle Kenyon: General Manager Titan Medical Mfg.

 

Michael Hipp: Microport Orthopedics, Inc.

Cory Clay: Quality Director Supervisor



Skills

5 Axis Mill Operator: Intermediate

Quality Control Technician: Advanced

Management: Intermediate

Chemical Processing: Advanced

Swiss Machinist: Advanced

Metal Finisher: Advanced

Heat Treatment: Advanced

This resume is created in 7 minutes.
Summary
Power Plant Operator skilled in the operation of the power generating stations, preventative maintenance and component assembly. Versatile [Job Title] well-versed in monitoring and inspecting power plant equipment and indicators to detect and repair operating problems. [Job Title] driven to maintain all operational and environmental parameters and safely perform routine plant maintenance.
Skills
  • Materials handling training
  • Safety-oriented
  • Safety inspections
  • Operational process tools
  • Able to lift up to 100 pounds
  • Quality control
  • Results-oriented
  • Self-motivated
  • Efficient
Experience
June 2011
to
February 2014
grecian steakhouse dyersburg, tennessee bus boy
October 2016
to
March 2017
grecian steak house dyersburg, tennessee cook
March 2017
to
Current
hexpol compounding dyersburg , tennessee mill operator
  • Operate rrubber mill
  • Made sound and logical judgments regarding process changes.
  • Closely inspected equipment for safety problems, leaks and wear and tear.
  • Coordinated ongoing maintenance and housekeeping of the plant.
  • Directed routine preventative maintenance such as adjustments, cleaning and painting equipment.
  • Maintained correct temperature, levels and pressures on process systems and equipment.
  • Communicated effectively with operators and supervisors on a technical level.
February 2014
to
October 2016
poly one dyersburg, tennessee machine operator
  • Made sound and logical judgments regarding process changes.
  • Closely inspected equipment for safety problems, leaks and wear and tear.
  • Reviewed the daily computer log and reported any inaccuracies in the process board.
  • Responded to and initiated proper corrections to process alarms.
  • Coordinated ongoing maintenance and housekeeping of the plant.
  • Directed routine preventative maintenance such as adjustments, cleaning and painting equipment.
  • Maintained correct temperature, levels and pressures on process systems and equipment.
  • Recorded all operating data on daily work sheet from laboratory analysis and flow metering equipment.
  • Communicated effectively with operators and supervisors on a technical level.
  • Executed field service work with little to no supervision, including water main and hydrant repairs, valve maintenance and water meter change-outs.
  • Performed quality control tests on lab equipment and lab analyses.
  • Interpreted results of process control analysis and made adjustments to optimize plant performance.
  • Maintained current knowledge about the latest operating and maintenance practices with continuing education courses.
Education and Training
2013
Dyer County High School newbern, tennessee, United states High School Diploma: horticulture and sciences