GSE Mechanic resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Tactical Vehicle Mechanic with over 24 years' experience in challenging environments. Knowledgeable, dedicated, adaptable and able to learn about any vehicle components or procedures quickly. Resourceful with excellent people skills, with an emphasis on problem-solving, safety and time management. Completes all paperwork proficiently ensuring customer satisfaction. 
-Evaluate and diagnose customer vehicles 
-Repair damaged machinery and components on light and heavy vehicles
-Service, repair and/or replace both minor and major components on light and heavy vehicles for use by the customer
-Review all vehicle systems for signs of malfunction and wear
-Consult with customers regarding repair needs and formulate plans
-Inside and outside customer relations are top priority 

  • First-Rate Troubleshooting 
  • Complete Vehicle Systems Knowledge 
  • Performs Technical Inspections
  • Equipment Repair/Replace
  • Pays Close Attention to Detail
  • Diagnostic Expertise
  • Excellent Customer Service 
  • Strong Work Ethic
  • Contributes/Collaborates 
Recognized by Joint Program Office Mine Resistant Ambush Protected Vehicle for the successful completion of the M-ATV FLMNET Course (40 hour) 
CERTIFICATE OF TRAINING presented by the U.S. ARMY TANK-AUTOMOTIVE AND ARMAMENTS COMMAND for the successful completion of a 24 Hour Training Course in Unit Maintenance for Extended Service Program (ESP) M35A3/M36A3
Certificate of Appreciation in grateful appreciation of and recognition for 10 Years of Dedicated Service
CERTIFICATE OF TRAINING for completion of "Spill Prevention and Action Plan Training" Fort Irwin and National Training Center 
DEPARTMENT OF THE ARMY Certificate of Appreciation In Recognition of Outstanding support to this headquarters and Team Tire during NTC Rotations 95-04 thru 95-11

Certificate of Training for Successfully Completing 80 Hour Training Course at Fort Irwin, CA (WHEEL) Maintenance Repair Techniques 
CERTIFICATE OF ATTENDANCE for successfully completing 60 hours of HVAC training Barstow Community College

05/2017 to Current
Tactical Vehicle Mechanic DA Defense Fort Irwin, CA Examine vehicles to determine the extent of damage or malfunctions. Communicate with customers regarding vehicle issues and potential repairs. Guide mechanics with decisions concerning repair and replacement of parts. Order accurate amounts of parts and supplies to maintain necessary inventory. Follows checklists to verify that all important parts were examined. Service, repair, and replacement of drivetrain, air conditioning, heating, engine-cooling, electrical systems, hydraulic and pneumatic components. 
05/2002 to 05/2017
Mechanic (Tactical Vehicle) VINNELL/Northrop Grumman Fort Irwin, CA Examine vehicles to determine the extent of damage or malfunctions. Communicate with customers regarding vehicle issues and potential repairs. Guide mechanics with decisions concerning repair and replacement of parts. Order accurate amounts of parts and supplies to maintain necessary inventory. Follows checklists to verify that all important parts were examined. Service, repair, and replacement of drivetrain, air conditioning, heating, engine-cooling, electrical systems, hydraulic and pneumatic components. 
High School Diploma

This resume is created in 7 minutes.
Professional Summary

Proven Mechanical Systems Specialist experienced in multiple power generation platforms. Demonstrated the ability to lead a team and execute complex procedures under duress. A clearable US Navy Veteran of 5 years, committed to achieving the highest quality and performance standards while maintaining a team-oriented work environment, and current undergraduate student at Cal Poly majoring in Aerospace Engineering.

Bachelor of Science: Aerospace Engineering Expected in 2021 California Polytechnic State University San Luis Obispo, CA

Transferred with honors

Mechanical Operator (Machinist Mate) for Nuclear Propulsion Systems Naval Nuclear Power Training Command Goose Creek, SC
  • MatLab/Simulink
  • SolidWorks / PTC Creo (CAD)
  • Electrical and mechanical drawing/diagrams
  • Hazardous material handling
  • Project management
  • Microsoft Office suite 
  • Data Analysis
  • Nuclear Mechanical Propulsion Operations
  • Thermodynamics/fluids
  • Mechanical design/implementation
Professional Experience
MAGE Intern 06/2018 to 09/2018 Space Systems Loral Palo Alto, CA
  • Created/designed structural platforms for vibration testing and installation for space flight systems
  • Overhaul and implemented a new inventory system for used satellite testing equipment
General Laborer/ Mechanic (While full-time student) 01/2016 to Current CA
  • Assisted over 20 hrs/week with mechanical systems for water purification distributors and manufacturers
  • Community involved with mentoring/tutoring children as a NSBE member in math and science
Maintenance Mechanic (Full-time student) 09/2014 to 01/2015 Pepsico (30 hrs/week) Sacramento, CA
  • Displayed expertise of the cooling systems and distillation units to help facilitate task completion
  • Maintained containment control records
  • Supervised designated production lines and known to take preventative measures to keep continuous operations
Operations and Maintenance Technician 04/2013 to 07/2013 DTE Energy Stockton, CA
  • Spearheaded the proper operations and preventative maintenance for the fuel recovery system.
  • Assisted in major mechanical repairs to minimize workflow disruptions.
  • Installed and coordinated lubrication maintenance program for fuel distribution system
Machinist Mate (Nuclear) 06/2007 to 10/2012 US Navy Bremerton, WA
  • Served as a senior mechanical operator
  • Innovated non-conventional projects for operational efficiency
  • Supervised a 4-member maintenance team, while adhering to the strict operating guidelines QA and SUBSAFE
  • Trained and instructed subordinates and supported units on auxiliary plant operations
This resume is created in 7 minutes.

Heavy duty Mechanic with more than 12 years of experience maintaining, planning, developing, installing, and repairing semi trucks, trailers, heavy equipment, construction equipment, forging equipment, and industrial machines. duties to include but not limited to, custom fabrication, welding, electrical wiring, hydraulic repair and installation, rebuilding, diagnostics.

  • Hydraulic installation and repair
  • Welder/Fabricator
  • Electrical
  • Carpentry
  • CDL class A/B
  • Equipment operator
  • Quick Learner
  • Diagnostics
Maintenance Mechanic - ATI Forged Products (Cudahy, WI) February 2019 - Current

Responsible for maintaining, repairing, diagnosing Forging hammers including hydraulic components, Mechanical presses, hydraulic manipulators, furnaces, forging equipment and building maintenance.

general duties including welding, fabricating, hydraulic cylinder and drive repair, teardown and reassembly of furnaces and hammers.

Service Manager/lead Technician - Accu-Trailer & Truck Repair (Franksville, WI) April 2008 - February 2019

All types of MIG and stick welding including steel, aluminum and stainless

Made all repairs and maintenance to trailers and trucks including building of coupler plates, fuel tank repair and welding, custom fabrication, alum reefer floor repair, ABS and wiring diagnosis and repair, suspension straightening/repair, suspension bushing replacement, frame straightening, hydraulic system repair and installation including wiring, pumps, cylinders, hoses, rams, seals and bushings.

replaced clutches, rear ends, transmissions, axles, water pumps, turbos

Responsible for maintaining all shop equipment including forklift, scissor lifts, clean burn system, welders, front end loaders, heavy trucks

Rigging trailers up level on cribbing to be repaired
Ran and maintained all kinds of equipment, forklifts, scissorlifts, JLG, Skidloader, excavator, dumptruck, etc

Spent the last 6 years handling managerial duties as well including parts ordering, invoicing, estimates, customer service, set up of shop jobs and dispersing workload.

Education and Training
High School Diploma 2007 Waterford Union High School, , Waterford, WI, United States
Some College (No Degree) in Structural Engineering 2008 UW Waukesha
2017 NGVI Certified in Natural Gas Inspection
This resume is created in 7 minutes.
Professional Summary

Accomplished personnel engagement professional with strong background supporting building and retention of talented teams. Skilled in tackling personnel grievances and conflicts, working with management in attainment of challenging objectives.

  • Employment laws and practices
  • Human resource laws expert
  • Good judgment
  • Time management
  • MS Office proficiency
  • Safety training
  • Workforce planning
  • Human resources policies
  • Employee recruitment
  • Trained in FMLA/ADA/EEO/WC
  • Business mediation
  • New employee orientations
  • Team building
  • Strategic planning
  • Continuous improvement
  • Blueprint interpretation expertise
  • In-depth OSHA knowledge
  • Interpersonal skills
  • Assembly line production
  • Labor relations
  • Organizational development
  • Risk management
  • Conflict resolution
  • Compensation and benefits
  • Audit preparation and reporting
  • Union grievance resolution
Work History
Apr 2018-Current Manufacturing Manager | Boeing Company | Everett, Washington
  • Collaborate with team to accomplish shift and monthly goals safely and efficiently.
  • Worked various programs such as, TMC, Velocity, IVT, CMES.
  • Compile shared knowledge on site specific safety procedures into a PowerPoint presentation and onsite procedure manual.
  • Assess monthly incident investigations to determine how team can best resolve safety issues.
  • Prepared reports and communication for senior management and customers.
  • Met or exceeded service and quality standards every review period.
  • Prepared and maintained production reports and personnel records.
  • Oversaw the production process and managed the production schedule.
  • Coordinated and supervised assembly work for couplers and rolling assembly crews.
  • Wrote process, employee and production schedules.
  • Maintained necessary level of communications between shifts.
  • Estimated costs and set quality standards.
Sep 2012-Apr 2018 Union Steward | International Association of Machinists and Aerospace Workers | Everett, WA
  • Developed and facilitated all new-hire orientations.
  • Educated and advised employees on group health plans, voluntary benefits and 401(k) retirement plans.
  • Conducted employee investigations.
  • Built a comprehensive employee recruiting strategy.
  • Developed innovative new-employee orientation programs, including safety training.
  • Developed and enforced company policy and procedures relating to all phases of human resources activity.
  • Managed all aspects of leave administration, including employee notifications and vendor management, disability programs and health benefits.
  • Acted as liaison between employees and insurance carriers to resolve problems and clarify benefits.
  • Explained all of the human resources policies, procedures, laws, standards and regulations to each employee.
  • Conducted exit interviews and verified that employment termination paperwork was completed.
  • Supported management in developing and implementing personnel policies and procedures.
  • Addressed all employee harassment allegations, work complaints and other concerns.
  • Developed and facilitated job recruitment fairs.
  • Successfully came to a resolution before any grievance was filed.
February 2011-April 2018 Fuel Tank Mechanic | Boeing Company | Everett, WA
  • Tested finished products for compliance with tolerances and overall quality.
  • Fabricated large and small parts per drawing and assembled parts as required.
  • Ordered repair parts and ensured requests for parts were executed in a timely manner.
  • Closely reviewed blueprints to determine equipment needed for installations or repairs.
  • Replaced damaged, missing or defective parts with new and refurbished components.
  • Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces.
November 2014-April 2018 Team Leader | Boeing Company | Everett, WA
  • Implemented new working processes that delivered continued improvements.
  • Established open and professional relationships with team members which helped resolve issues and conflicts quickly.
  • Notified engineering of errors and discrepancies.
  • Planned, scheduled and delegated daily work.
  • Maintained necessary level of communications between shifts.
  • Organized work to meet demanding production goals.
  • Oversaw the production process and managed the production schedule.
  • Worked with suppliers to outline improvement strategies like using different methods improve their quality.
  • Reported out to Executive Management about current top issues and solutions to those chronic issues.
  • Implemented several rate break schedules in order to meet delivery demands.
June 2020 Bachelor of Arts: Business Management City University of Seattle, Seattle, WA

International Association of Machinists Union Steward 2012-2018 Everett, Washington