Commercial Electrician resume examples

Check our hand-picked these Commercial Electrician resume examples for your next role and increase your chances of getting hired. For a quick start with your own resume, you can edit any of our examples. It takes up to 10 minutes to create a resume using Resumist builder. Download your perfect resume and start your job application today!

Skillful Commercial Electrician resume

CHRISTOPHER CALHOUN
Professional Summary
My objective is to obtain the position of a Process Technician with a World Class Manufacturing Complex.  
Work History
Olefins Process Operator 10/2010 to Current
LyondellBasell La Porte, TX
  •  Backup (PMC) Production Maintenance Coordinator - Coordinate the Maintenance Operational Workflow Process (MOWP), Knowledge of SAP Software, Scrutinize Notifications in (SAP) Prior to Approval, Sorting, Processing Work Orders in (SAP), Scheduling, Executing & Closure of Work Orders, Forecasting the Monthly Maintenance Budget 10MM annually Olefins Unit, Submitting Monthly Accruals to Accounting (Managing 3rd party services), Managing the Leak Detection and Repair (LDAR) Program
  • Utility Control Board Operator - Operates and monitors the site's steam production and water operations as well as all Tank Farm distribution operations.
  • Compression and Distillation Control Board Operator - Operates the site's two main Refrigeration Compressors and the Primary Pyrolysis Gas Compressor. Controls and monitors process gas separation and product distribution. Works closely with Process Controls in troubleshooting D.C.S. issues in an effort to remove production constraints.
  • E.R.T. Service Member - Serves on the site's Emergency Service Team including Fire, Rescue, and Hazmat.


Olefins Process Operator 07/2008 to 10/2010
ExxonMobil Baytown, TX
  • Operated and maintained equipment relating to ethylene production. Worked specifically in Fractionation, Compression, and Quench areas.
  • Standing member of the site safety and leadership committee.
  • Fire Team Member
Industrial Electrician 08/2006 to 07/2008
Texan Electric Houston, TX
  • Installed and maintained electrical equipment such as, substation switch gear, electrical motors, variable frequency drive systems, and P.L.C. panels.
  • Troubleshot and maintained various process transmitters and instrument/pneumatic controllers.


Commercial Electrician 08/2002 to 07/2006
Melton Electric Houston, TX
  • Installed wiring and electrical equipment in office and commercial buildings.
Heavy Weapons Non-Commissioned Officer 06/1998 to 07/2002
United States Marine Corps Camp Pendleton, CA


Do you want similar resume?

Popular Commercial Electrician resume designs

According to our data, these resume designs are the most suitable for Commercial Electrician. You can easily get a similar resume design in 10 minutes. Just select the one you like the most!

Job-winning Commercial Electrician resume

Juan Suriel
Professional Summary
Motivated Electrician who completes projects on time and uses professional level skill and trade knowledge to demonstrate superior performance on job sites.
Skills
  • Knowledge of National Electric Code (NFPA 70)
  • Electrical equipment maintenance
  • Blueprint fluency
  • Troubleshooting complex control systems
  • NCCER hands on certified
  • MSHA Certified
  • conduit installation expert
Work History
Electrician , 08/2014 to 08/2014
Zachry Industrial Freeport, TX


  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
Industrial Electrician , 07/2014 to 08/2014
Zachry Industrial Front Royal, VA
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Industrial & commercial Electrician , 11/2012 to 01/2014
Zachry industrial Front Royal, VA
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Planned motor starter and control installations using codes and specs.
  • Consistently updated knowledge of safety requirements and policies.
  • Maintained and tested fire alarm systems.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Worked extended hours on weekday and weekend projects.
  • Recorded the respective measurements for each project.
  • Updated service record files on equipment drawings and history.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Fabricated specific electrical component parts and assemblies.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
Industrial & commercial Electrician , 02/2012 to 11/2012
Zachry Industrial Cape Canaveral, FL
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Industrial & commercial Electrician , 01/2011 to 02/2012
Zachy Industrial Cape Canaveral, FL
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Planned motor starter and control installations using codes and specs.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Industrial Electrician , 02/2009 to 11/2010
Rees Company NY
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Planned motor starter and control installations using codes and specs.
  • Consistently updated knowledge of safety requirements and policies.
  • Maintained and tested fire alarm systems.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Worked extended hours on weekday and weekend projects.
  • Recorded the respective measurements for each project.
  • Updated service record files on equipment drawings and history.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Fabricated specific electrical component parts and assemblies.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
Industrial & commercial Electrician , 08/2008 to 02/2009
Advanced Trade Services Inc Baltimore, New York
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Worked extended hours on weekday and weekend projects.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Operated systems such as Andover Energy Management Systems and computers.
Residential & Commercial Electrician , 04/2008 to 08/2008
Staff Mark Bath, Pennsylvania
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Developed in-depth knowledge of arc flash ratings and standards.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Planned motor starter and control installations using codes and specs.
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
Residential & Commercial Electrician , 01/2008 to 04/2008
Fagan Allentown, Pennsylvania
  • Maintained a working area that was clean, safe and stocked with appropriate equipment and supplies.
  • Operated systems such as Andover Energy Management Systems and computers.
  • Measured devices, including analyzers, amp meters and volt-ohm meters.
  • Tested equipment tools such as oscilloscopes, ammeters and test lamps.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
Industrial Electrician , 08/2005 to 09/2007
Seaman's Furniture Houston, Texas
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Updated service record files on equipment drawings and history.
  • Recorded the respective measurements for each project.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Maintained and tested fire alarm systems.
  • Consistently updated knowledge of safety requirements and policies.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Developed in-depth knowledge of arc flash ratings and standards.
Maintenance Electrician , 05/2003 to 06/2005
seamans Robbinsville, New Jersey
  • Maintained and tested fire alarm systems.
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Fabricated specific electrical component parts and assemblies.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
Education
apprentice electrician: electrical, 2004
Home Builder Institute Grafton Job Corps - North Grafton, MA
  • Computer Skill Improvement course
  • Coursework in Fiber Optics and Structure Cable, Field Estimating Principles and Fire Alarms
  • Conduit Bending Program
facilities maintance : maintenance, 2004
albany job corps - Albany, NY
  • Advanced Lighting Control coursework
  • Computer Skill Improvement course
  • Conduit Bending Program
High School Diploma: 2004
perth amboy high school - Perth Amboy, NJ

High school Diploma

Certifications

Nccer hands on certified.

Msha certified.

Osha 30 certified.

Safety council IDs ready.

Texas apprentice license.


Do you want similar resume?

Top Commercial Electrician skills

Take a look at the most common Commercial Electrician skills, don't hesitate to use them in your resume to catch recruiters' attention.

Experienced Commercial Electrician resume

Dylan Jacobson
Professional Summary

Electrician with 5 years experience in the residential and commercial electrical field, Areas of expertise include attention to detail, conduit bending, control systems, wiring, and terminating. Working as an electrician is my passion and is what brings my to work every day motivated and ready to be challenged by a new task each and every day.

Skills
  • NEC code regulations
  • Electrical panel upgrades
  • Electrical provisions installation
  • Control circuit troubleshooting
  • AC/DC control circuitry
  • Safe Work Practices
  • Blueprint Reading
  • Electrical Wiring
  • Fast-Paced Environment
  • Exceptional Problem Solver
  • Strong Communication Skills
  • Quality Control
Work History
Commercial Electrician 04/2017 to 07/2017
National Electrical Contractors, LLC. AUS, TX
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Worked extended hours on weekday and weekend projects.
  • Consulted with the supervisor electrician regarding the likely risks associated with the assigned job.
  • Demonstrated expertise in the use of cable reels, stripping tools, voltage detectors, crimping tools and wire and cable cutters.
  • Journey-Level Electrical Experience
  • Telecommunications cable installation and termination
  • Familiar with electrical wiring color codes
  • Worked with High and Low voltages, single phase, 2 phase, and 3 phase
Commercial Electrician 08/2016 to 04/2017
Faulk Electric Corporation Tucson, Arizona, United States
  • Journey-Level Electrical Experience
  • New Building Projects
  • Installed, tested and modified circuit breakers, controls, fuses, lights and motors.
  • Interpreted drawings, wiring diagrams, flow charts and written descriptions of the project requirements.
  • Worked with various types of cableways, conduits and other electrical raceways.
  • Fire alarm installations
  • Strong understanding of electrical theory.
  • Excellent knowledge of transformers, relays, switches, and motor controls
  • Planned motor starter and control installations using codes and specs.
  • Installed electrical conduit and wiring for power, controls and lighting.
  • Installed electrical and mechanical equipment in accordance with the National Electric Code.
Low Voltage Electrical/ Communications Technician 08/2013 to 06/2015
Montano's Communications Inc Tucson, Arizona, United States
  • Installation and upgrading of 2 way radio and data equipment in all emergency response vehicles in Pima County  (TPD, PCSD, TFD, ect.)
  • Contracted by ASARCO for installation of all communication systems 
  • Installed and serviced radio equipment in and around mine facilities, and mining equipment
  • Installed, programmed, and serviced repeaters, antennae's, cable, electrical panels.
  • Consistently working safely in hazardous enviroment
  • Troubleshooting Technical Issues
  • Electrical Systems
  • Maintenance Technician Experience
  • MSHA certified
Education
Associate of Applied Science: Computer Aided Drafting 2006 Pima Community College - Tucson, AZ
Do you want similar resume?