Diesel Mechanic resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Results driven and highly knowledgable offshore drilling professional with over 30 years experience ranging from roustabout work with crane crew, a position as a certified welder and fabricator, to the final position as a Mechanic in the maintenance department. Proven work with a record of success in cost control, effective team building, environmental protection, and well production. 
  • Comprehensive knowledge of mechanical tools, equipment, and measuring instruments
  • In-depth knowledge of pumps and compressors with sound knowledge of production equipment
  • Well versed in operating and maintenance of measuring instruments
  • Ability to communicate effectively with excellent problem solving and troubleshooting skills
  • Ability to work in confined places and on high platforms
  • Establishing goals and setting priorities
  • Certified Welder
  • Consistent work history
  • Cross-collaborate with various departments aboard the rig to ensure all necessary drilling equipment functions properly
  • Professionally operate in harsh conditions while ensuring projects are completed on time and exceed company expectations
  • Solid communication skills
  • Timely project completion
  • Schematics reading
November 2017 to Current
Spencer Ogden (Temporary Service)
  • Temporarily employed for upgrade project on an Ultra Deepwater drilling rig
  • Repaired and maintained mechanical and hydraulic rig systems
  • Took preventative measures to ensure no breakdown of rig components
  • Efficiently documented daily repair and maintenance work 
  • Adhered to company safety standards and protocols to maintain a healthy work environment 
April 2010 to March 2017
Transocean Offshore Houston, TX
  • Used the RMS rig based Preventive Maintenance program to properly perform 30, 90, 180, and 365 day inspections and service to rig equipment
  • Utilized RMS program for tracking parts for job specific and upcoming planned maintenance
  • Duties include troubleshooting and diagnosing various problems but not limited to pneumatic, hydraulic, and mechanical issues
  • Efficiently using vendor technical manuals to perform maintenance on equipment to prevent loss or down time
  • Participate in Company Safety program permit to work, lock out tag out, observation card program, written plan process, and stop work authority
Education and Training
TDS 8 & 1000 MECHANICAL COURSE, 2008 National Oilwell Varco Houston, TX Mechanical course that provides the necessary skills and knowledge to perform routine maintenance, repairs, and troubleshooting skills.
2339 MH MDDM 1250™ , 2014 Aker Solutions Katy, TX Gives an understanding of how the MH Modular Derrick Drilling Machine 1250™ (MDDM) functions and operating philosophy. Also trains how to perform first line maintenance and troubleshooting in a safe manner.
BX Elevator, PS/30, 2013 National Oilwell Varco Houston, TX Mechanical course that provides you with the necessary skills and knowledge for routine maintenance, repairs, and troubleshooting skills.
Oil Rig Hydraulics, 2014 Applied Motion Technologies Bethlehem, PA Provides you with the necessary skills and knowledge to understand hydraulic schematics to perform routine maintenance, repairs, and troubleshooting skills.
Iron Roughneck 3200,4500, and 500 models, 2013 National Oilwell Varco Houston, TX Mechanical and technical course that provides you with the necessary skills and knowledge to perform routine maintenance, repairs, and troubleshooting skills.
Functions and Utilization of Fluid Power Certificate of Completeion, 2013 Bosch Rexroth Training Center Bethlehem, PA
Pipe and Plate Qualification Test, 2005 Qualitech Services Morgan City, LA Completed 6G pipe test in 1999 and completed 4G plate test in 2005
Pipe Racking System, 2013 National Oilwell Varco Houston, TX Mechanical and technical course that provides you with the necessary skills and knowledge to perform routine maintenance, repairs, and troubleshooting skills.
  • Received the Global Chevrons CVX Award in response to performance in safety management judged at an international level 
This resume is created in 7 minutes.
Professional Summary
  • High School Diploma
  • 6+ Years Military Experience
  • 6+ Years Mechanical Experience
  • Associates Degree

  • Critical thinking
  • Secret Security Clearance
  • Troubleshooting
  • Strong leader
  • Skilled researcher
  • HAZMAT training
  • Environmental safety
  • Diagnostics knowledge
  • Exhaust systems
  • Fuel ignition repair
  • Air conditioning systems
  • Heavy equipment operation
  • Equipment calibration
  • HAZMAT familiarity
  • Water treatment operations
  • Superior verbal and written communication skills
  • Calm under pressure
  • Analytical thinker
  • Desktop and laptop repair
  • Power and hand tools
  • Safety procedures knowledge
  • Strong mechanical aptitude
  • Possesses a reliable vehicle
Work History
Vehicle Maintenance Journeyman, 09/2011 to Current
United States Air Force (Reserve now) Dayton, Ohio

    I was active duty for a four year enlistment, and then transferred to the reserves. I am currently a Staff Sergeant and I have been doing vehicle maintenance my whole time in the military. 

      Normal duties included preventative maintenance like schedules, and getting vehicles back into service in a timely manner to keep the mission going. I was mainly working on fire trucks, and jet fuel tanker trucks. Company names like International, Cat, Cummins, Oshkosh, Kovatch, Pierce, and Volvo. 

      My military duties had me maintaining chain of command by solving problems at the lowest level possible. We had many diverse obligations. Adaptable to any situation, and performing tasks with a sense of urgency. All depending on what the mission dictates. 

  • Calibrated and monitored devices following installation.
  • Programmed and troubleshot devices following installation.
  • Repaired malfunctioning system components.
  • Followed a routine maintenance checklist.
  • Recorded type and cost of maintenance and repair work.
  • Instructed team members on maintenance policies and procedures.

Roofer, 05/2016 to 08/2016
Shield Roofing South Point, Ohio
  • Installed high quality roofing systems in the safest and most cost effective manner.
  • Expanded knowledge of roofing materials, techniques and cost effectiveness.
  • Removed snow, water and debris from roofs prior to applying roofing materials.
  • Installed, repaired, and replaced single-ply roofing systems.
  • Conducted regular inspections and troubleshot building roofing systems.
  • Managed inventory of roofing supplies and materials.

Seasonal Laborer, 02/2016 to 08/2016
City of Ashland Water Treatment Plant Ashland, Kentucky
  • Maintained adequate water storage tank levels and pressures to meet water demand.
  • Retained tank levels and flow rates to meet water demand.
  • Monitored flows, pressures, chemical feeds levels and water quality indicators.
  • Executed field service work with little to no supervision, including water main and hydrant repairs, valve maintenance and water meter change-outs.
  • Collected and analyzed biological data about relationships between organisms and their environment.
  • Accurately inventoried lab chemicals and supplies.
  • Attended monthly safety meetings to ensure machine operation safety.
  • Communicated operational issues and changes to supervisor on regular basis.

Diesel Mechanic, 04/2017 to Current
Averitt Express Lexington, KY
Maintain and repair company transportation assets including trucks, trailers, fork lifts, and other vehicles. 
Associate of Science: Vehicle Maintenance, 2016
Community College of the Air Force - Maxwell, Alabama
This resume is created in 7 minutes.
Professional Summary
Reliable, diligent, and motivated OEF veteran seeking employment in the Upper Peninsula where professionalism and hard work thrive. I am committed to productivity, responsibility, and discipline. I thoroughly enjoy working as a team or individually assigned to complete the task.
03/2017 to Current
Carpenter Lakeside Construction Cedarville, MI
  • Calculate accurate material estimates
  • Organize assigned tasks for completion on individual and team levels
  • Install interior paneling
  • Deconstruction of ceiling, cement, and siding
  • Conduct a clean and organized workspace at all times
07/2015 to 10/2015
General labor E. J. MERTAUGH BOAT WORKS Hessel, MI
  • Winterized boats through fuel systems cleaning, gear oil change, and engine fogging
  • Repaired fiberglass
  • Sand and painted wood and fiberglass hulls
  • Saved customers an average of $2,400 per week winterizing and storing vessels via speed and proficiency
  • Maintained a neat and professional workshop by keeping workspace orderly and utilized lawn-trimming equipment
01/2015 to Current
Cook Snow's Bar & Grill Cedarville, MI
  • Adept at promptly preparing and proportioning food while operating under high-volume orders
  • Write the work schedule for subordinate cooks
  • In charge of submitting the food order bi-monthly through Gordon Food Service
  • Takes initiative to find extra tasks when scheduled duties were completed
  • Work environment is consistently in compliance with all applicable codes
  • Carefully maintains sanitation, health and safety standard in all work areas

02/2009 to 02/2013
1341-Heavy Equipment Diesel Mechanic UNITED STATES MARINE CORPS Camp Pendleton, CA
  • Tested, repaired, and maintained system malfunctions in diesel, electrical, hydraulic and power train systems
  • Conducted Technical Inspections on Terex 5K, Skytrak Model MMV, Kalmar, and Tram 644E
  • Reviewed and validated technical publications for accuracy
  • Logged and filed classified documents via security clearance
  • Trained and instructed subordinates on mechanical systems, HAZMAT, combat readiness, proficiency, and conducts
  • Served as Shop Chief in Afghanistan to oversee matters of organizational maintenance and all Equipment Repair Orders
Art History, Economics, English Cabrillo Community College Aptos, CA
Candidate for Associates of Art
Woodworking Great Lakes Boat Building School Cedarville, MI Academy included classic woodworking, small boat construction, traditional, and composite wooden boat building. Building upon the first year, further Coursework with wood/epoxy composite development and yacht joinery. Introduction to marine systems.

Additional Information
  • Navy Unit Commendation
  • Marine Corps Good Conduct Medal
  • National Defense Service Medal
  • Afghanistan Campaign Medal (W/1 Star)
  • Global War on Terrorism Service Medal
  • Sea Service Deployment Ribbon
  • Nato Medal-ISAF Afghanistan
This resume is created in 7 minutes.
Professional Summary

Target-Driven Employee that strives for perfection in every task. With 2 years of progressive management experience, and 6 years of Field Service Engineering experience, I dedicate myself to the project I'm on with 100% of my ability and focus. And I am always striving to be the best team player I can be.

  • Arc, and Mig Welding
  • Brazing and Soldering
  • Basic Workmanship Skills including basic electrical, and mechanical. Sharpening drill bits, tap and dye, etc.
  • Ability to work with various types of power tools, and heavy equipment (forklifts, loaders, excavators, etc.).
  • Basic machining skills with Lathes, Presses, etc.
  • MS Office programs, QuickBooks, SAP Software, and other logging software used in the industry.
  • Control circuit troubleshooting
  • Strong customer focus
  • Quality assurance
  • Complex issues management
  • Works well in a team environment
  • Electrical panel upgrades
Work History
Field Service Engineer, 05/2017 to Current
Tokyo Electron (TEL) Hillsboro, OR

First of a kind modifications (iPro Team). Inventory, Install, and Test first of a kind modifications on Wet/Dry Etch Tools. Worked directly with the customer to make key improvements in the tools operation as a lead, and from beginning to end of the modifications to inform the customer of each step being performed in the mod. 

Implemented schematics, diagrams, written and verbal descriptions to effectively solve engineering project issues. Compiled data and generated graphs to interpret results and suggest key operational improvements. Completed projects by effectively applying engineering, technical and maintenance procedures. Used precision test equipment such as oscilloscopes, multi-meters, waveform generators and RF calibration equipment. Collaborated with engineers at the new product introduction phase to develop and verify design changes.

Field Service Operations Engineer, 08/2016 to 04/2017
Applied Materials Hillsboro, OR

Main focus was Physical Vapor Deposition, and Chemical Vapor Deposition tools, along with Wafer transferring systems and robotics. Operations included installing and troubleshooting various kinds of pneumatic, hydraulic, mechanical, and electrical parts. Calibrated and troubleshot robotics. Performed regular and preventative maintenances. Referred to blueprints, repair manuals, and parts catalogs to diagnose and repair equipment. Operated precision measuring instruments and electrical and electronic testing devices. Extensive training in Xian, China, and Taichung, Taiwan. Traveled regularly for work. Used SAP software daily for multiple tasks. Volunteer Leader on the Grassroots Safety Team.                 
Robotics and Engineering Technician, 10/2015 to 08/2016
Keen Footwear Portland Oregon
Daily tasks include, but aren't limited to: Replacing pneumatic Festo valves, trouble shooting PLC's, ABB Robots,Desma Machinery, Tower Dryers, and pneumatic/hydraulic equipment. Also using CAD I designed new parts, thenweld, fabricated and installed the new parts for the machinery to increase productivity and manufacturing speed. Keptrecords of parts, inventory, expenses. Also occasional building maintenance, HVAR/R, compressors, drywall,warehouse work, etc.
Wind turbine Field Service Engineer, 08/2015 to 10/2015
Sentry Electric Bedford, IA
3 month wind turbine project that dealt with the installation of the Electrical. Ran 690V cables from the base to Nacelle (top of tower). A4 Deck Cabinet termination. Complete termination of Fibers, and 690V Aluminum Cables. Other focuses included installing temp lights, FAA lights and YAW boxes.
Field Service Engineer and Regional Mountain West Manager, 01/2015 to 08/2015
PureMist Montana, North Dakota, Wyoming
Managed multiple plumbing operations from initial consult to finish (Blueprints, routes, designs, parts, etc.). Operated jobs that included days of travel from state to state. Covered all of Montana, North Dakotah, Wyoming, and Idaho. Efficiently replaced full pneumatic misting systems, pumps, spray bars, Sterile systems, and membranes. 
Regional Manger, 01/2014 to 01/2015
Stay Brite (Self Employed) Helena, MT
Managed full operations including full AC, Furnace, Restaurant Equipment, and Plumbing Installs. Trained technicians in Brazing, soldering, and other forms of welding. Trained Technicians in HVAC-R. Worked in sales to bring in large contracts such as Samsung, CVS, AHS, etc. Met with Regionals and CEO's of different large clients to discuss procedures, presentations, and discuss efficiency and savings from using our company. 
Diesel Mechanic, 08/2013 to 01/2014
James Burg Trucking Company Detroit, MI
Worked on a variety of different truck brands including KenWorth and Peterbilt. Tasks included everything from Oil and Tire Changes to full Transmission and Axle Rebuilds and Swaps. I also worked on full pneumatic brake systems, various diesel engines, and hydraulic pumps. Fabricated new Aluminum trailer designs for efficiency, bringing load capabilities from 86,000 lbs. to 110,000 lbs.
Fabrication and Welding, 09/2012 to 08/2013
Casco and Sons/ Gabberts Concrete Detroit, MI

Fabricated a variety of structures and spiral stair cases, trailers, frames, etc. Managed Plant operations such as fabricating and welding cement forms, to running loaders and other heavy equipment, batching cement, mixing material, setting grades.

Worked with, repaired, and maintained multiple hydraulic and pneumatic systems and tools. From Heavy Equipment to Plant equipment.

Technical Certificate: Diesel Technology & Welding, 2013
Oakland Technical Center - Wixom, MI
  • OSHA 10