Flooring Installer resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Professional Summary

Experienced technician with more than 15 years of work in aviation performing a variety of installation and maintenance tasks on avionics hardware and wiring assemblies. Hard-working and efficient. Works well under pressure.

Skills
  • Advanced knowledge in repairing, troubleshooting and installing avionics systems
  • Strong abilities in creating and installing wire budless per SWPM
  • Advanced experience using aircraft manuals
  • Sufficient experience using tools for wires termination and installation
  • Experience operating and complying with Functional Check that require the use of Air data tester, IRF- 4000 and 6000, ATC-601, PSD60-2R, ATC-601, T-33, SPL-1636, Megohmmeters and Bonding Meter
  • Easily reads and interprets electrical wiring diagram and schematic
  • Intense focus and attention to detail.
Work History
Avionics Technician, 08/2019 to Current
 Aviation Personnel / Flightstar Services – Jacksonville, FL
  • Performed Troubleshooting in several aircraft system and adjustment of autopilot sensor and flight
    control in B-767, B-757
  • Performed Software update using Airborne Data Loader in FDAU, FMC in B-767, B-757
  • I worked in APCU displace modification in B-767
  • Performed Operational and Functional check of the aircraft system in B-767 and B-757
  • I worked in the MCDU modification in B-757
Avionics Installer, 01/2019 to 08/2019
 LAUNCH SERVICES / AVIATION STAFFING – Atlanta, GA
  • 2KU Installation in B737-700
  • IDTV to IPTV Mod in B737-900
  • LED Convention in B-717
  • Gate to Gate in B-757
  • PED Mod in B737-900
  • B767/Entertainment System IFE-ADB replacement Cable
  • A319-A320 FDIMU install
Avionics Technician, 09/2018 to 12/2019
 DGS – Atlanta, GA
  • Performing modification of 2KU in B-737-700 and ADS-B in md-88 , b-737, b-757, and A-320
  • FDIMU installation in A-319 and A-320
  • Redundant harness modification of the IFES and wifi systems in B-767. 757 and b-777
  • Operational, functional check, EWiS card, replace parts in different aircraft
Avionic Technician 2, 01/2018 to 08/2018
 Flightstar Aircraft Services, LLC ( PSD) – Jacksonville, FL
  • Performing Operational, functional tests, replacing parts and troubleshooting in aircraft MD-88, B-757, B-717 and B-737-400
  • Modification of the ADS-B in MD-88 ,B-717 and B-767.
  • Modification of the Battery charger, Stabilizer Trimer in B-757
  • APU, Electronic Control Unit relocation SB in B-767
Avionics Installer, 11/2017 to 01/2018
 Delta Global Staffing – Delta TOC, Atlanta, GA
  • Modification experience of 2KU in B-757, B-737-900 and A-350
  • Modification experience of ADS-B in B-757, B-717 and MD-88
Avionics Installer, 09/2017 to 11/2017
 Krouse Aeronautical Services LLC – Flightstar Aircraft Service, Jacksonville, FL
  • Power panel P70, P37, P34 and P32,31 rework. Modfication of Data lauder , Crew warning , Main Deck Cargo light, Emergency light, Smock detectors and conversion door in B-757
Avionic Technician 2, 01/2011 to 08/2017
 Flightstar Aircraft Services, LLC – Jacksonville, FL
  • Experience performing operational and functional test of aircraft systems in MD-90, MD-88, B-717, B-727, B-737, B-757.
  • Performing troubleshooting in several aircraft system and adjustment of autopilot sensor and flight control
  • Performing Software update using Airborne Data Loader in FDAU, FMC
  • Modification Experience of NBA conversion , LED MOD, EEPLS, WI-FI, Flat Bed MOD, IFE ,FAS a ATC Transponder in B-757.
  • Modification Experience of Go-go Wi-Fi , PED power set, VHF, LED light, ACARS, Flight ,Airfoil ice protection, EGPWS, GFE in MD-90
  • Modification experience of Pram mod, Flight Data Recorder, ACARS Sys, Vhf-3, PC Power Mod, Medical Jacks, Heater Sys, Galley Power & EPC Panel Rework , Ovens and WI-FI in B-717
Avionic Technician, 08/2010 to 09/2010
 Aerojet Support inc – Avmax, Jacksonville, Florida.
  • Performed Operational and Functional check of the aircraft system in CRJ-700 and DASH-8
  • Performed troubleshooting and removed and replaces parts.
Avionics Technician, 05/2010 to 08/2010
 Laras Avionics Inc – Commercial Jet Aircraft Service, Miami
  • Performed troubleshooting, routines cards, and operational checks in B-707, B-727, B-737, B-757, B-767, MD-80 and MD-11
Avionic Technician, 01/2008 to 01/2010
 AAR – Miami
  • Performed operational checks, routines task on fuel systems, flight controls, other system and troubleshooting in MD-80, B-757, B-747, B-767, B-737,B-717, A-300, A-310, A-321, A-320, A-321, and A-321
  • Performed simples modification, engineering orden and service bulletins
  • Change of landing gear and engines in B-727 and b-757.
Computer Repair Technician, 07/2003 to 12/2007
 Micro Product Distributors – Miami, FL
  • Established compatibility with third party software products by developing program for modification and integration
  • Assemble and repaired desktop and laptops
  • Repaired and Calibrator of CD-ROOM players
  • Upgrade, installation and repair of operating systems
  • Upgrades and driver's installation of differents computer hardware
  • Provided documentation on start-up, shut down and first level troubleshooting of processes to help desk staff
Technician In Equipment Electro Automatic Of Aviation., 08/1991 to 06/2002
 San Antonio Air Base – Ciudad Habana, Cuba.
  • Repaired and maintenance of flight simulator of the Jet Fighter MIG-23 MF and L-39
  • Maintenance and repair of low frequency equipment in MIG-21, MIG-23 ML, MIG-23BN , MIG-23MF AND MIG-29
  • Adjustment and repair of autopilot and navigation systems in MIG jet Fighters
  • Operated hand tools to adjust functional parts of devices and control instruments
  • Operated precision measuring instruments and electrical and electronic testing devices
  • Installed machinery, equipment and new and replacement parts
Education
High School Diploma: 1986
 Saul Delgado - Habana, Cuba
Associate of Applied Science: Electro- Automatic Equipment for Aviation, 1991
 Cap. Luis A Silva Tablada. - Habana, Cuba
Bachelor of Science: Telecomunication ISPJAE - Habana, Cuba
Certifications
  • T.C Computer technician CompTIA A+
  • FCC General Radiotelephone Operator License and Ship radar endorsement.
Accomplishments
  • Familiarization Course of B-737-NG with CFM56-7 Engine, 80 hrs
  • Familiarization Course of B-727-100 & 200  with P&W JT80 Engine, 40 hrs
  • Familiarization Course of MD-80, 40 hrs.​
  • Familiarization Course of B-737-300,-400, & -500, 24 hrs
  • Familiarization Course of B-757-200 & -300 (ETOPS) with the RB211 535, P&W 2000 Engines, 40 hrs
  • Familiarization Course of B-717, 80 hrs
This resume is created in 7 minutes.
Professional Summary

Looking to contribute to your team/company in order to finance my own entrepreneurial start-up as a Health Consultant & Portrait Photographer

Work History
Teammember (Cashier/Barista) 07/2012 to 08/2014
Tim Hortons – Toronto Road, Port Hope
  • Greeted customers promptly.
  • 2 Years of Service
  • Received customer payments.
  • Made Coffee, Lattes, Cold Drinks, Sandwiches 
Team Builder (Construction Labourer) 07/2014 to 11/2014
Habitat For Humanity – Government of Canada
  • Loaded and unloaded building materials used for construction.
  • Prepared and cleaned construction sites by removing debris.
  • Followed established job site safety regulations and maintained a safe and clean work area.
Logistics Attendant 03/2015 to 08/2015
Bell Canada – Peterborough, Ontario
  • Cleaned and maintained the warehouse in compliance with OSHA safety standards.
  • Verified that vehicle inspection stickers and registrations were current.
  • Received, stored and shipped goods and materials.
Cook 08/2015 to 12/2015
Eddie Burger Bar – Banff, Alberta, Canada
  • Cooked Burgers, Salads, Deep Fried Foods
  • Cleaned Kitchen/Equipment
  • Fast Paced; High Demands
Barista/Cashier 05/2017 to Current
Tim Hortons – Port Hope, Ontario

.

  • Greet Customers, Take & Fulfill Orders
  • Unload Delivery Truck Weekly
  • Build Relationships with Customers
Window And Door Installer 06/2016 to 11/2016
J&W Home Improvements – Northumberland Area
  • Installed Residential Windows
  • Cleaned Worksite/Tools/Waste
  • Interacted with Customers

​
Skills
  • Customer Service
  • Social Skills
  • Verbal Communication
  • Public speaking
  • Self-motivated
  • Selling/Sales
Education
High School Diploma Port Hope High School - Port Hope
This resume is created in 7 minutes.
Professional Summary

Develop and implement safety policies to maintain accident-free workplace. Support warehouse operation workflows by receiving and shipping, loading and unloading goods, and transferring completed products and raw materials to designated storage.

Work History
Air Conditioning Installer, 09/2016 to 07/2017
 Air Conditioning Service – Miami, FL
  • Completed ground, attic and roof unit installations.
  • Kept supplies organized and ready for use.
  • Fabricated, hung and insulated ductwork for new installations.
  • Performed maintenance and repair services on residential and commercial systems.
  • Swept up job sites and removed debris to leave customers with professional impression.
  • Consulted with customers to trace malfunctions and identify root causes, completing speedy repairs to return full performance levels.
Packer, 07/2017 to Current
 Hit Promotional Products – Largo, FL
  • Protected materials during transport by correctly assembling boxes and crates.
  • Promoted delivery efficiency by accurately labeling and organizing containers.
  • Decontaminated work areas using sprayers to apply cleaning and disinfecting solutions.
  • Reviewed orders by inspecting labeling, packaging and contents.
  • Checked packing slips and other documentation to appropriately box items requested by clientele.
Education
Skills
  • Stocking
  • Customer-oriented
  • Consistently meets sales goals
  • Skilled problem solver
  • Motivated team player
  • Merchandising
  • Employee relations
  • Active listening skills
  • Shipment processing
  • Shipping procedures understanding
  • Order fulfillment
  • Planning and scheduling
  • Product testing
  • Equipment setup and maintenance
This resume is created in 7 minutes.
Professional Summary
Resourceful and quick-thinking Warehouse worker with 20 years in warehouse and inventory management. Improves shipping and receiving efficiency and accuracy by applying strong leadership skills.
Skills
  • OSHA standards
  • Quality assurance
  • Quality inspection
  • Material handling
  • Team leader
  • Hard working and self-motivated
  • Inventory management
  • DOT regulations
  • Forklift operation
  • Material inventory skill
  • Palletizer knowledge
  • Shipping and receiving
  • Current Forklift Certification
Work History
Inventory Clerk/Quality Control, 11/2007 to Current
 US Foods – Garland, TX
  • Help maintain inventory levels and product quality by performing essential clerical functions,including records compilation and retention,computer updates and requisition preparation.This provides the division with up to date inventory records to ensure efficient shipping and a high confidence in customer product.
  • Operate PC and RF-based computer systems with a high level of accuracy.
  • Pick up incoming stock and delivered materials to designated locations.
  • Forecast manpower requirements based on daily workload and company targets.
Warehouse And Logistics Supervisor, 01/2004 to 06/2007
 Duplium Corporation – Carrollton, TX
  • Determined the most cost-effective procedures and routes for shipments.
  • Minimized damage and repair costs through careful management and preventative maintenance.
  • Managed shipment schedules to maximize productivity and cut costs.
  • Coached 25 other employees and assisted with quarterly performance reviews.
  • Communicated with dispatchers, warehouses and customers regarding outgoing orders.
Warehouse Lead Assistant, 05/2002 to 12/2003
 United Distributors Inc – Smyrna, GA
  • Ensured timely response in picking and packing of reorders.
  • Followed company procedures to maintain work environment in a neat and orderly condition.
  • Communicated operational issues and changes to supervisor on regular basis.
  • Accurately read, understood, and carried out written instructions.
Computer Tape Media Specialist, 05/1998 to 06/1999
 Affiliated Computer – Houston, TX
  • Consistently met deadlines and requirements for all production work orders.
  • Provided documentation on start-up, shut down and first level troubleshooting of processes to help desk staff.
  • Ensured network, system and data availability and integrity through preventative maintenance and upgrades.
  • Coordinated with systems partners to finalize designs and confirm requirements.
Shipping And Receiving Supervisor, 10/1997 to 05/1998
 AVIAN KINGDOM – Houston, TX
  • Successfully managed production activities so all orders were shipped on time.
  • Managed documentation of and training on production procedures and work instructions.
  • Maintained and communicated daily productivity and shipment reports for all departments.
  • Planned, directed, coordinated and assigned manpower to meet aggressive production schedules.
Driver/Warehouse, 01/1997 to 10/1997
 Stanford Chemical – Garland, TX
  • Verified each delivery against shipping instructions before delivering to customers.
  • Loaded truck and properly secured items to prevent damage during transportation.
  • Operated heavy material handing equipment such as fork trucks and cranes.
  • Created and submitted delivery and DOT logs.
  • Loaded truck and properly secured items to prevent damage during transportation.
Pool Installer, 03/1994 to 11/1996
 Aquatic Pools – Alliance, NE
  • Completed tear-down of existing structures and prepared for new construction.
  • Accurately estimated time and materials costs for projects.
  • Provided accurate measurements and estimates for all projects.
  • Monitored inventory and reported items to be restocked for each job.
  • Loaded and unloaded building materials used for construction.
Inventory Clerk, 02/1987 to 08/1993
 Rubbermaid – Akron, OH
  • Moved freight, stock and other materials to and from storage and production areas and loading docks.
  • Redirected shipments en route in response to customer requests.
  • Coordinated with freight forwarders to expedite international shipments.
  • Maximized sales by shipping on time and accurately.
Education
Associate of Arts: Music, 1986
 Tyler Junior College - Tyler, TX.

Try our Resume Builder!

Let’s face it: we all judge by appearances. And recruiters and hiring managers are no different. Submitting a Fill In Resumes is just as important as dressing sharp for a job interview.

Targeting other Construction? See one of our examples:

Most popular resume samples: