Roustabout resume examples

Choose and edit as your own

Get inspired by the best resume examples picked for your profession and create your!

Add pre-written phrases

Describe yourself as a professional just in 2 clicks! All the phrases you need are prepared by us

Save and Download your Resume

Save it in PDF format. Ready-to-sent to you employer!

This resume is created in 7 minutes.
Accomplishments
  • Maintained an incident free driving record for more than 8 years.
  • Incident free for over 8 years.
  • Commercial Drivers License Class A
  • HazMat/Tanker Endorsements
  • SMAW Structural welding qualified through Tri State
  • Completed Power Plant Fundamentals Class
  • CPR and First Aid Certified
Professional Summary
Proficient at driving commercial trucks of many varieties. Body loads, stake beds, 53' box trailers, and liquid/bulk trailers. Compliant with all DOT regulations. I have a clean MVR and a safe work history. Can work as many hours as needed. Excellent working as a team or alone. Proficient knowledge of tools required to do a job. Proficient in measuring and cutting pipe to fit. Listens to direction and motivated by deadlines. Takes pride in any job i have to do. do have some experience in Arc welding and fabrication. have passed the SMAW plate test for structural welding. familiar with industrial safety standards and compliant. 
Skills
  • Deadline motivated
  • Tanker and hazmat endorsements
  • Air Brake certified
  • Efficient route planning 
  • Clean MVR
  • Adverse weather
  • Pride in Work
  • Structural welding
  • Pipe fitting
  • Some Fabrication
  • Available to work in remote locations for long periods of time
  • Able to work long hours
  • ​Fast-learner
Work History
Roustabout tier 3 06/2010 to 08/2010
D&D oilfield Service Wamsutter WY
  • Construction of oil and gas locations
  • heavy equipment operation
  • start from bare dirt and finish up to production
  • maintained locations after completion
  • Traveled somewhat for job locations.
  • Plumbed in piping from holding tanks to separators and to flare off stacks.
  • set condensate tanks
  • measuring and cutting pipe and threading it to size.
Pump Technician 3 11/2010 to 01/2015
Halliburton Energy Services Grand Junction, CO
  • Maintained and serviced high pressure pumps for hydraulic Fracturing on a daily basis in the oilfield.
  • Driving Commercial vehicles almost everyday.
  • Conducted daily DOT pre and post trip inspections.
  • Four and a half years incident free.
  • Lead technician over high pressure pump maintenance for two years.
Service Operator 2 01/2015 to 01/2016
Halliburton Energy Services Grand Junction, CO

completed daily DOT Check offs on commercial vehicles.

 safely drove to and from job location every day

ran chemicals for hydraulic fracturing job safely with no incidents

worked with high pressure iron up to 24,000 PSI safely

operation of ground valves and well head valves

running equipment remotely from the data van

inspection of equipment and diagnosis of issues while pumps were running


Utility Worker 01/2016 to Current
Tri-State Generation & Transmission Nucla, CO
  • Repaired malfunctioning system components.
  • ​Detected faulty operation of equipment and defective materials and promptly resolved issues.
  • Set up and operated hand and power tools, including shielded metal arc and gas metal arc welding equipment.
  • Operated hoists, cranes and power tools to dismantle equipment to find and remove defective parts.
  • Fabricated shop parts directly from blueprints.
  • Salvaged and rebuilt parts whenever possible.
  • General maintenance of plant site.
  • Assist operations in daily activities when needed.
  • follow all Lock Out Tag Out Procedures
  • maintain CPR certifications and respiratory guidlines
Education
High School Diploma: General Education 2009 Nucla High School - Nucla, CO
This resume is created in 7 minutes.
Summary

Hard Worker who is dependable and reliable. Motivated to get along well with others and exceed expectations. I've been trying to find a place to start an actually career. I really hope I get the opportunity to work for U.S. Steel. I appreciate the consideration  

Highlights
  • Fast learner
  • Good at following instructions 
  • Good at problem solving 
  • Good with people and working in groups
  • Interpretation of blueprints, wiring diagrams and drawings
  • I like to take initiative and move on to what needs done next after finishing task/project before told to if allowed  
Experience
Savanna Pallets September 2017 to Current Machine operator/Maintenance
Remer, MN

   Work consist of: Running and maintaining saws and stackers.

Welding/fabricating and heavy maintenance as needed inside, outside of mill, scaling log trucks, and loading trucks when needed.

   Manager: Blaine #

Frontier Trading LLC. November 2016 to March 2017 Lead painter, apprentice welder/fabricator
Pasco, WA

   Sand blasting, sheet metal work, Prepping and painting produce trailers. Also helping Joaquin the lead welder with fabricating new produce trailers.

   Supervisor: Jeff, cell# 

Perfect Circle Construction August 2016 to November 2016 Laborer
Kennewick, WA

Tour off and installed roofing

Supervisor: Denny, phone#

ZMI Ranch May 2016 to September 2016 Ranch hand
Prescott, WA

   Work consist of: FIxing irrigation, building habitats, building and mending fences, spraying and mowing fields and ranch roads

   Manager: Skip Russell, Phone#, Cell#

Mitchells oil field service May 2013 to April 2014 Roustabout
Killdeer, ND

   Work consist of: Built OIl tank farms or "batteries" installed setting tanks and doing all the pipe fitting between tanks and treaters with schedule 40 & schedule 80 steel pipe and using equipment like skidster's and backhoe's to build diking around battery and dig trenches. 

   Supervisor: Kyle Kachelhoffer, cell#

Education
Cornerstone Christian Correspondence School 2017 High School Diploma Townsend, GA, USA
This resume is created in 7 minutes.
Career Overview
Seeking a position where my skills and experience can be effectively utilized for product an development of the company. Skilled Lease Operator and Roustabout Gang Pusher with experience in the Oil and Gas Industry. Familiar with Esp. pumps, Compressors, Pump Jacks, Tri Plex pumps, Gas lift wells, and Water Injection wells. 
Skill Highlights
  • Experienced Lease Operator
  • Experienced Roustabout Pusher
  • Basic Computer Skills
  • Trouble Shooting
  • Bilingual
Experience
Roustabout Pusher/Pumper Jan 2018 to Current
Spartan Kermit, TX
  •  Oilfield maintenace on pump jacks, Control vales, Tank Battery Facility's, Flow lines, Compressors, and help out Operators trouble shoot.
  • Supervised Personnel.
Roustabout Pusher Feb 2017 to Jan 2018
Alliance Field Services Midland, TX
  • Oilfield maintenace on pump jacks, Satellites, Battery Water Stations, Injections Wells, Flow lines, Compressors, and helped out pulling units.
  • Supervised Personnel.
Roustabout Pusher Mar 2016 to Feb 2017
Wayne's Welding Services Monahans, TX
  • Oilfield maintenace on pump jacks, Satellites, Battery Water Stations, Injections Wells, Flow lines, Compressors, and helped out pulling units.
  • Supervised Personnel.
Roustabout pusher/ Pumper Mar 2015 to Jan 2016
W & W ENERGY SERVICES, INC. Odessa, TX
  • Oilfield maintenace on pump jacks, Satellites, Battery Water Stations, Injections Wells, Flow lines, Compressors, and helped out pulling units.
  • Supervised Personnel.
  • Relief Pumper for Cimarex.
Roustabout Pusher/Pumper Apr 2014 to Mar 2015
RWI Construction Midland, TX
  • Oilfield maintenace on pump jacks, Satellites, Battery Water Stations, Injections Wells, Flow lines, Compressors, and helped out pulling units.
  • Supervised Personnel.
  • Relief Pumper for Cimarex.
Education and Training
2011 Monahans High School
This resume is created in 7 minutes.
Professional Summary
A motivated, proactive, and respected leader with extensive experience and success in the oil and gas industry. Past experience includes twenty-five years in numerous positions within the  business, ultimately moving into upper management and providing comprehensive, insightful, resourceful, and valuable knowledge leading to extremely successful teams and production. Continually learning and leading others to explore optimization methods in all areas of the business to enhance the jobs of employees as well as production and corporate profits.  Focused leadership style on developing team members to their fullest potential to benefit both them and the company.
Work History
District Production Superintendent, 03/2016 to Current
Linn Energy Kingfisher, Oklahoma
  • Responsible for production of over 1400 wells in the Scoop/Stack and NW Stack areas.
  • Lead and develop eight production foreman, review their daily reports and contract crews, guide foreman in identifying courses of action using the latest technology and processes within budget to ensure optimal production at the lowest operating cost.
  • Collaborate with both engineers and consultants to continually optimize well production.
  • Collaborate with Marketing/SCM on product sales, well servicing, and water hauling issues for Central and NW Oklahoma.
  • Remain current on compliance policies and government regulations while achieving maximum production and minimal cost.
  • Organize and maintain monthly district safety meetings for over 60 employees on relevant safety topics.
Optimization Foreman 2/Completion Foreman 2/Foreman 1, 06/2012 to 03/2016
Linn Energy Kingfisher, Oklahoma
  • Optimization Foreman 2- Responsible for setting and enforcing expectations and creating schedules for direct reports and contractors.  Coordinated selection of vendors and materials for projects in conjunction with engineering and SCM. Assisted with creating SOPs to minimize failure rates while repairing and maintaining mature assets. Trained employees on the latest Echometer technology to efficiently deliquify wells.  
  • Completion Foreman 2- Performed completions, workover activities , and fracs on new and existing wells in accordance with engineering plans, regulations, and company standards.  Responsible for safe and environmentally sound daily operational activities. 
  • Foreman 1- Supervised rig crews while making well repairs and reporting procedures in wellview.
Production Foreman, 09/2010 to 06/2012
Linn Energy Kingfisher, Oklahoma
  • Oversaw eight employees and over 400 wells in NW Oklahoma.  Wells consisted of gas and electric pumping wells, single and dual stage plunger wells, flowing wells, ESPs, and injection wells.
  • Trained and developed my direct reports and contractors while consistently stressing safe and environmentally sound daily operational activities.
  • Played instrumental role in the Lucien field acquisition including replacing outdated equipment, training field employees, and building and managing relationships with land and mineral owners.
Production Specialist/Field Operator 4-Lead, 09/2007 to 09/2010
Linn Energy Kingfisher, Oklahoma
  • Production Specialist- Lead and trained other operators with minimal supervision.  Performed daily operational checks of assigned wells and tank batteries. Evaluated daily work flow of operators and contractors and identified ideas for optimization.
  • Field Operator 4-Lead- Worked with Specialist and Foreman to coordinate work and perform minor repairs.  Measured and recorded volumes, pressures, temperatures and other required readings. Made daily decisions within guidelines on production levels and lease operating expenses.
Assistant Foreman/Senior Lease Operator, 01/2004 to 08/2007
Dominion E & P Kingfisher, Oklahoma
  • Worked directly with 3 foremen and provided relief with supervising rig jobs and handling  production issues.
  • Supervised rig crews to ensure safety and efficiency.
  • Responsible for all scheduling of company and contract pumpers.
  • Pumped any of thirteen route when needed.
Lease Operator, 12/1999 to 01/2004
Westport Oil and Gas Calumet, Oklahoma
  • Pumped and maintained 22 production wells and 13 injection wells.
  • Managed central production battery and injection plant.
  • Responsible for daily reports and supervised rig crews.
Roustabout, 10/1996 to 12/1999
Westport Oil and Gas Calumet, Oklahoma
  • Constructed and maintained batteries, production flow lines, and injection plants for three fields with approximately 140 wells.
  • Relief pumped when needed.
Lead Roustabout, 12/1993 to 09/1996
Marsau Oilfield Services El Reno, Oklahoma
  • Supervised a crew and truck.
  • Built tank batteries and installed flow lines.
Lead Operator, 09/1991 to 11/1993
Windor Supply Company Tulsa, Oklahoma
  • Fabricated doors.
Machinist, 02/1990 to 05/1991
Charlie Bean Door Company Stillwater, Oklahoma
  • Built cabinets and doors from raw materials.
Roustabout, 05/1988 to 08/1990
Bogert Oil Company Kingfisher, Oklahoma
  • Summer job- trained as a Roustabout in Construction.  Built production batteries.  Set up treaters, separators, and tanks.
Education
Health Education, 1
Oklahoma State University - Stillwater, OK
This resume is created in 7 minutes.
Summary
Dependable, hard-working Supervisor with over 7 years of experience in the oil field industry, frac and production side.
Skills
  • Managing large crews
  • Quality control
  • OSHA regulatory compliance
  • Blueprint reading and interpretation
  • Dependable independent worker
  • English/Spanish fluency
  • Strong work ethic
  • Certified in HAZCOM, fire safety, H2S, forklift operation, man-lift/scissor-lift, first aid/CPR, etc
Experience
Supervisor Jan 2017 to Jun 2017
Pumpmasters Fort Collins, Colorado
Responsible for supplying and providing any and all needs the crews needed to operate for 4 different frac locations.
  • Successfully managed night shift crew of 15 English- and Spanish-speaking workers for 4 frac locations
  • Verified that machine setups conformed to specs
  • Worked overtime, including evenings and weekends, to respond to emergencies and fix unsafe conditions
  • Assisted in management of business operations by maintaining records and files, preparing cost and inventory reports, and ordering supplies
Piperfitter Apr 2016 to Jan 2017
SFS - Security Fire Systems Coppell, TX
Responsible for fitting metal/plastic piping for sprinkler systems in commercial buildings:
  • read blueprints and measured to scale to cut appropriate length of pipes to replace/build fire sprinkler systems
  • operated man-lifts to reach areas where piping was needed while abiding by all safety regulations
Roustabout Nov 2014 to Nov 2015
ROC Services Bridgeport, Texas
  • Set production tanks on new wellsite locations.
  • And would plumb the well heads to any and all tanks with different grade of pipe ranging from 1"- 12" in circumference.
  • Operated heavy machinery to move equipment and joints of pipe.
Drill Pipe Inspection Crew Nov 2013 to Jun 2014
Washita Valley Enterprises, Inc Texas
  • Cleaned drill pipe threaded ends, face of pipe
  • Meticulous visual inspections for signs of stress or fractures
  • Check and verified wall thicknesses at predetermined points of each section of drill pipe
  • Performed length measurement and overall reading of pipe wall integrate by use of special equipment designed for this specific process
Pump Supervisor Aug 2011 to Jun 2013
Red Oak Water Transfer/Rockwater Energy Texas

Devoted my undivided attention to the safety and highly productive operation of providing water to remote sites for fracturing operations.

Required:

  • In-depth mathematical skills to provide on site costs analysis
  • "Job Safety Analysis" and communicating with the fracturing locations Energy consultant.
  • Monitoring many factors to insure that the process of providing water to fracturing locations went uninterrupted.
Education and Training
High School Diploma Poolville Isd Poolville, Texas
Languages
English - Excellent ( Read Write Speak )
Skills
  • Forklift certified
  • Management & inspection
  • Machinery
  • Pipe fitting
  • Safety regulations
Additional Information
  • Driver's License Class C - Standard Driver's License
This resume is created in 7 minutes.
Professional Summary
Bilingual professional possessing  excellent communication skills with a strong work ethic. Knowledge of safety and procedures for staying safe and keeping crew members safe. Willingness to teach & learn and advance within the company and position. Highly productive without supervision.
Skills
  • Good communication skills
  • Iron-roughneck 
  • Tongs
  • Tripping in & out
  • Man lift, forklift
  • Strong math and measuring aptitude
Work History
07/2017 to Current
Floorhand H&P Drilling Oklahoma
  • Work efficiently with co-worker while tripping pipe.
  • Daily housekeeping, organizing, cleaning tools,  equipment.
  • Ensured rig floor was kept clean at all times.
  • Worked as a team in rigging up and down procedure.
  • Assist motorman with preventative maintence and repair of equipment and motors, also check and change oil and coolant on engines.
  • Use forklift to move or offload materials. 
  • Watch and maintain shakers, mud pits, and pumps.
  • Work in a fast pace & efficinetly without supervision.
02/2016 to 06/2017
Ironworker Foreman Johnston Products of Dallas Dallas, TX
  • Conduct safety meetings, pre-task with the whole crew. 
  • Get any necessary permits for safety or hazards.
  • Make sure everyone has necessary equipment & up to code. Safety harnesses/, power tools.
  • Measure and mark layout for installation according to the blueprints.
  • Unload material from trailers, move with skytrak or crane.
  • Install many different types of material such as beams, stairs, hand rails, posts, decking, frames.
  • Make necessary welds to hang/ install multiple stairs/ hand rails.
  • Use torch when needed to cut steel, make holes, or necessary adjustments.
  • Inspect all work, mark progress and stay up to date with material equipment.
06/2015 to 12/2015
Roustabout S&W Co. Amarillo, Texas
  • Daily housekeeping, cleaning tools, equipment, get everything ready for the job site.
  • Picked up the poly pipe and got it ready to take out to the rig site.
  • Made measurementsto see how much poly pipe would be needed.
  • Unload poly pipe, make necessary welds when necessary.
  • Inspect thoroughly and make sure there\\\\'s no leaks and make repairs if needed.
  • Use acetylene torch to cut steel pipe when needed and weld up manifolds.
  • Welded transitions when needing to connect to frac tanks or quick connects when needing to connect to water pumps etc.
  • When working at the rig it would consist of helping the derrickman mixing mud/ chemicals.
06/2012 to 04/2014
Brick Mason Hernandez Masonry Amarillo, TX
  • Responsible for creating and erecting various types of structures, including buildings, fences, roads, and walkways.
  • Built and repaired walls, floors, chimneys, and fireplaces.
  • I would cut, break, and lay materials to be formed into structures.
  • Examine work before starting to determine everything that needed to be done and afterwards to make sure and meet and exceed customers expectations.
  • Removed damaged tile, brick and mortar.
Education
2015
High School Diploma:
Tascosa High School - Amarillo, TX

Certifications
  • 30 hr. OSHA Certified
  • CPR Certified
This resume is created in 7 minutes.
Professional Summary
Construction professional bringing valuable experience from large corporate construction sites, as well as residential home repair projects. I am motivated to learn new trades and skills. Interested in growing a career and developing leadership capabilities. Dedicated worker with excellent interpersonal skills who works in a timely and efficient manner to see tough jobs through to completion.
Skills

  • Operate Heavy Equiptment such as:(backhoe,track hoe, front-end loader, pettibone, bulldozer, skid steer, material handler)
  • Perform basic electrical work
  • Running elecrtrical conduit
  • Plumbing including: brazing and soldering copper pipe and the cutting and threading of steel pipe
  • Installation of pvc/plastic pipe
  • Operate Chain saw and do tree climbing
  • Experiance in tree soil and animal identification
  • Mig and Tig Weld
  • Welding of mild steel, stainless steel, and aluminum
  • Reading of blueprints and schematics
  • Fabrication work such as: cutting, shearing, bending, and more to metals including aluminum and steel
Work History
Welder Helper, 01/2016 to 12/2016
Strike Pipeline LLC Woodlands Tx
  • Operated Equiptment
  • Prepared pipe to be welded
Environmental Crew, 07/2015 to 12/2015
Eagle Pipeline LLC Pickerington, OH


  • Backfill excavations, jackhammer asphalt/rock and compact and level earth to grade specifications using shovels, tampers and rakes
  • Prepared and cleaned construction sites by removing debris.
  • Perform technical construction and repair on major utility pipelines.
  • Signal equipment operators to facilitate alignment, movement and adjustment of machinery, equipment and materials.








Environmental Crew/Opertor, 07/2015 to 07/2015
Mid Ohio Pipeline Services Lexington Oh
  • Environmental Crew
  • Operate trackhoe





Straw boss/Labor hand, 07/2014 to 03/2015
Lineal Industries Bridgeville, PA
Straw boss on the bending/engineering crew Labor hand/Swamper on tie-in and coating crews 




roustabout, 01/2014 to 07/2014
Crossfire Oklahoma
Extra hand on Nomac drilling rig duties included assembly and tear down of entire rig pressure washing using ksw pumps and general maintenance of the rig also mixing mud with trackhoe 


Assembly Technician, 04/2012 to 11/2013
Tremcar U.S.A Strasburg, OH
  • Assembled tank trailers
  • Mig and Tig Welding
  • Welded stainless steel,mild steel, and aluminum 
  • fabrication of parts
  • Read blueprints and specification sheets



Yard Hand, 02/2012 to 04/2012
Lincoln Manufacturing Strasburg, OH
  • Measured length and diameter of pipe with calipers and stacked pipe using a pettibone


Education
High School Diploma: 2009
Tuscarawas Valley - Zoarville, OH
Certificate: Natural Resources & HVAC, 2009
Buckeye Career Center - New Philadelphia, OH
This resume is created in 7 minutes.
Professional Summary
I bring a lot to the table with my experience of multiple trades and skills.  I'm a leader and always have been.  I have good people skills and nothing is ever to tough for me to figure out.  
Skills
  • Knowledge in oil/methane 
  • New construction and remodeling
  • Basic electrical and plumbing skills
  • Extensive experience with heavy equipment and pipeline knowledge 
  • Sewer-related experience
  • Good communication skills
  • Fast learner
  • Basic computer skills
  • Customer relationship building
  • Equipment problem resolution
  • Strong initiative
  • Strong mechanical skills
  • Strong written and verbal communication skills
  • Strong team player
  • Supervisory experience
  • Great at trouble shooting
  • General math skills
  • Good multitasker
  • Good judgment
  • Great at following verbal and written instructions
  • Safe
Work History
Freedom Terminal Services Site Supervisor | Fort Laramie, WY | October 2014 - Current
  • In charge of high speed loading process of crude oil to tank car
  • Accurately read, understood, and carried out written instructions.
  • Manage employees and ensure they are doing their job 100 percent 
  • Direct employees and guide employees of their daily/ normal tasks
  • Attend monthly safety meetings to ensure machine operation safety.
  • Communicated operational issues and changes to supervisor on regular basis.
  • Follow company procedures to maintain work environment in a neat and orderly condition.
  • Perform routine preventive maintenance to ensure that building systems operated efficiently.
  • Use PLC system 
JM Construction Carpenter | Lingle, WY | February 2012 - October 2014
  • Operated wide variety of equipment including power saws, sanders, grinders, cranes drill press, forklift and basic hand tools.
  • Informed supervisors when machines needed major service.
  • Met production goals by maintaining cost effective levels of spare parts inventory.
  • Followed standards and procedures to maintain safe work environment.
  • Maintained positive relationships with all customers.
  • Ensured proper installations through accurate reading of blueprints.
  • Used precision measuring instruments, templates, and fixtures to measure dimensions of finished work pieces.
  • Inspected machine parts for conformance to product specifications.
  • Followed company procedures to maintain work environment in a neat and orderly condition.
  • Employed wide variety of hand and power tools including hoists, drills, precision measuring instruments and electronic testing devices.
  • Accurately read, understood, and carried out written instructions.
  • Developed and executed layout and installation of electrical wiring and fixtures based on job terms and city regulations.

Farnsworth Services Roustabout Foreman | Newcastle Wy | June 2007 - May 2011
  • Pipellined using poly pipe
  • Erosion Control
  • General maintenance on both oil and methane wells
  • Set pumping units and tanks
  • Hooked up well heads 
  • Hooked up treaters
  • Dug up flow lines
  • Dug up gas and water lines
  • Hooked up to mini pods
  • Maintained water treatment plants
  • Repaired water leaks
  • Dug pits for rigs
Education
High School Diploma Newcastle High School Newcastle Wy, | 2007
This resume is created in 7 minutes.
Professional Summary
As well  as currently owning and operating my own tire business i worked in the oil and gas industry for ten years including three years on the drilling side and seven years in the production side. During most of my time in years of work service I have held multiple supervisor positions. I am a team player first and always. I have a strong work ethic and positive attitude.  I am one of those people who always wants to be challenged and strive for success in anything i try to do. 
Skills
  • Management skills involving 20+ employees
  • vast knowledge of natural gas facilities construction and maintenance
  • vast knowledge of operating gas equipment and compressor facilities
  • years of working with JSA's, Dupont stop card program, hot work permitting, confined space entry, many safety leadership training.
  • good with math as i use this daily operating my Big O Tires franchise
  • I Have good customer relation skills
  • Many hours of management training
  • Vast knowledge of automotive industry
Work History
C.E.O. 08/2014 to Current
Big O Tires 303 S Federal BLVD Riverton, Wyoming
I currently am in charge of day to day operations at my Big O Tires location. I oversee all finances and work being done in my shop. I schedule work load and sell tires and service work.
Derrick Hand 01/2011 to 01/2013
H&P Drilling company North Dakota
  • I was in charge of maintaining drilling mud and keeping mud pumps operational.
  • supervised rig operations on the ground and acted as middle man between driller and the rig crew below me.
  • would relieve driller and run the rig when he needed to step away.

As well as the things mentioned above i have worked all positions below derrrick hand and have quite the knowledge regarding rig operations. Before my rig stacked i was starting to train as driller.

Production Foreman 08/2006 to 11/2011
Maddock Enterprise Inc. Lysite Wyoming

Production Foreman

  • Supervise maintenance and project work in the field
  • Manage work load between conoco and crews in the field, Such  as job planning and getting all necesary parts to complete jobs in the field.
  • Enforce all safety policies and write all permits including hot work, confined space, and lock out tag out. Also insure all JSA's are filled out correctly.

Contract lease operator

  • operated and maintained natural gas facilities and gas wells
  • logged and entered well sight information into computer systems

Roustabout Pusher

  • Responsible for hooking up new gas well facilities including all pipe fitting and assisting welders.
  • Troubleshoot and repair natural gas seperators,compressors, and salt water disposal facilities.

Motor Hand 12/2005 to 08/2006
Grey Wolf Drilling Colorado
  • Maintained all engines and generators on the rig
  • maintained drilling location and all inventory 

Roustabout Pusher 12/2003 to 12/2005
High Country Construction Lander, Wyoming
  • Natural gas facility hook up
  • Pipeline installation and valve set plumbing
  • heavy equipment operator

vehicle mechanic 08/2000 to 01/2002
U.S.A.F. Ellsworth Air Force Base
  • Maintained all vehicles in the 28th transportation wing
Education
High School Diploma: 2000 Henderson High School - Salisbury N.C
Certificate of training: Vehicle mechanics 2000 Vehicle mechanic school - United States Air Force
Affiliations
  • Search And Rescue  Riverton, Wyoming